Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Does Anyone Have A Chevy 216 V6 Motor That Needs To Be Rebuilt?
          
   
submit
   

Results 1 to 15 of 97

Threaded View

Corvette85 Does Anyone Have A Chevy 216... 06-03-2006, 04:38 PM
Corvette85 No one has one? It can be... 06-03-2006, 06:38 PM
HOTRODPAINT You may be misleading people... 06-03-2006, 07:10 PM
Corvette85 I said I needed it for my 48... 06-03-2006, 07:13 PM
Corvette85 Someone told me it was a v6. ... 06-03-2006, 07:14 PM
HOTRODPAINT On another thread "Henry... 06-03-2006, 07:35 PM
Itoldyouso Zak: Been reading the... 06-03-2006, 08:09 PM
Corvette85 For one thing I was at my... 06-03-2006, 08:26 PM
Oldf100fordman If you really want to drive... 06-03-2006, 08:35 PM
Corvette85 I don't have any intentions... 06-03-2006, 08:32 PM
HOTRODPAINT (QUOTE) (probably someone... 06-03-2006, 08:39 PM
Corvette85 Yeah I would like to have... 06-03-2006, 08:44 PM
Corvette85 I'm not saying it's the best... 06-03-2006, 08:47 PM
Corvette85 I think that I'm off to a... 06-03-2006, 08:54 PM
76GMC1500 Don't those old motors have... 06-03-2006, 11:49 PM
R Pope Too bad you're so far away... 06-04-2006, 04:47 AM
Itoldyouso I think that I'm off to a... 06-04-2006, 05:17 AM
Matt167 www.chevsofthe40s.com sells... 06-05-2006, 04:15 PM
Henry Rifle My advice . . . wander over... 06-04-2006, 06:49 AM
Dave Severson 216's and 235's weren't a... 06-04-2006, 06:55 AM
Mike P One thing I have not seen... 06-04-2006, 07:06 AM
chevy 37 I agree with what the others... 06-04-2006, 08:06 AM
Corvette85 Itoldyouso-I understand... 06-04-2006, 08:20 AM
renu3636 13885son, my advise to you is... 06-04-2006, 08:24 AM
Corvette85 What I meant by rebuilding a... 06-04-2006, 08:24 AM
Corvette85 I was looking on Ebay and... 06-04-2006, 08:27 AM
Corvette85 My car looks just like except... 06-04-2006, 08:50 AM
Corvette85 You're car is very nice. Did... 06-04-2006, 08:52 AM
Corvette85 Since I got this car for free... 06-04-2006, 08:54 AM
76GMC1500 Trust me, you don't want to... 06-04-2006, 09:17 AM
Corvette85 I'm new to this. What's so... 06-04-2006, 09:18 AM
renu3636 I am second owner of this... 06-04-2006, 09:23 AM
Corvette85 Thanks. Do they not make... 06-04-2006, 09:27 AM
chevy 37 216 engine 06-04-2006, 10:05 AM
Corvette85 I just like the way the old... 06-04-2006, 10:03 AM
gassersrule_196 if that was true my nova... 06-14-2006, 09:38 AM
HOTRODPAINT If this will give a... 06-04-2006, 10:08 AM
Corvette85 Thanks, I know you all are... 06-04-2006, 10:10 AM
Corvette85 I've got plenty of time. ... 06-04-2006, 10:11 AM
chevy 37 Zak Your 216 engine you want... 06-04-2006, 10:16 AM
Corvette85 Ok, well now the only problem... 06-04-2006, 10:22 AM
Corvette85 How much does it cost to get... 06-04-2006, 10:24 AM
Corvette85 Hopefully when I get done it... 06-04-2006, 11:07 AM
Henry Rifle Just a thought. When someone... 06-04-2006, 11:08 AM
Corvette85 I didn't post that. I like... 06-04-2006, 11:10 AM
Itoldyouso Zak, if I came across as a... 06-04-2006, 11:31 AM
Matt167 these motors actully were... 06-05-2006, 04:22 PM
Dave Severson Well, whatever you do, make... 06-04-2006, 11:18 AM
Corvette85 I probably would try not to... 06-04-2006, 11:21 AM
Corvette85 My cars weren't gifts. My... 06-04-2006, 11:39 AM
Corvette85 I know they (216) aren't the... 06-04-2006, 11:40 AM
Corvette85 I want the original engine... 06-04-2006, 12:11 PM
chevy 37 Tha depends on your state. Go... 06-04-2006, 12:19 PM
Henry Rifle Call Texas DOT and tell them... 06-04-2006, 01:13 PM
Corvette85 Thanks for the help. Zak 06-04-2006, 01:21 PM
Henry Rifle Matt, The rod bearings... 06-05-2006, 04:22 PM
Matt167 that's true. I think they... 06-05-2006, 04:30 PM
Matt167 they could be. I know there... 06-05-2006, 04:31 PM
Oldf100fordman Matt, unless I've gone... 06-13-2006, 08:41 AM
Itoldyouso I really think he is going... 06-13-2006, 09:06 AM
techinspector1 "Trouble is, I don't think... 06-13-2006, 09:56 AM
Matt167 I don't know, could be. I... 06-13-2006, 01:50 PM
Corvette85 Thanks for the replies, Zak. 06-12-2006, 10:25 PM
Corvette85 I understand what everyone is... 06-13-2006, 10:05 AM
Itoldyouso Don, your wisdom is exceeded... 06-13-2006, 10:42 AM
Corvette85 Thanks for helping. I don't... 06-13-2006, 11:08 AM
robot Gotta add my 2 centavos here:... 06-13-2006, 11:49 AM
Corvette85 Thanks for the reply. I kind... 06-13-2006, 12:01 PM
Itoldyouso Mike in Tucson brings up some... 06-13-2006, 02:01 PM
Henry Rifle Just a thought. YOUR guesses... 06-13-2006, 01:54 PM
Corvette85 That's what I planned on... 06-13-2006, 01:59 PM
Corvette85 I wanted to start with the... 06-13-2006, 02:17 PM
Corvette85 That stinks. Someone on Ebay... 06-13-2006, 02:36 PM
Itoldyouso I think I am done with this... 06-13-2006, 03:00 PM
Dave Severson Step 1--get a title Step... 06-13-2006, 03:10 PM
Corvette85 I know what you all are... 06-13-2006, 03:13 PM
robot Do what Dave says. If you... 06-13-2006, 03:37 PM
gassersrule_196 :LOL: yeah we all know how... 06-14-2006, 09:49 AM
Corvette85 Someone already had the... 06-13-2006, 03:45 PM
Corvette85 How do I go about getting a... 06-13-2006, 04:00 PM
Dave Severson Get the vin number off the... 06-14-2006, 03:44 AM
Big Tracks I went through that titling... 06-14-2006, 06:05 AM
Corvette85 About the title. How much... 06-14-2006, 08:09 AM
Big Tracks I honestly don't remember... 06-14-2006, 09:34 AM
Corvette85 If the 235 & the 216 are so... 06-14-2006, 08:10 AM
Corvette85 Big Tracks-Thanks for all of... 06-14-2006, 10:00 AM
Corvette85 Here's what I said, "I am... 06-14-2006, 10:10 AM
Big Tracks Sounds okay to me, Zak, and... 06-14-2006, 12:50 PM
Corvette85 Thanks, I'll do that as soon... 06-14-2006, 12:51 PM
Corvette85 Should I wait to get the... 06-14-2006, 01:13 PM
robot Tip #1: Be prepared to not... 06-14-2006, 01:49 PM
Big Tracks I wouldn't think there is any... 06-14-2006, 02:40 PM
Corvette85 Thanks fopr the advice. If I... 06-14-2006, 02:39 PM
Henry Rifle It's only been said a half... 06-14-2006, 04:19 PM
Itoldyouso - That's it. I'm done with... 06-14-2006, 04:52 PM
Corvette85 I'm off of the motor hunt. I... 06-14-2006, 04:59 PM
Corvette85 I didn't mean to put V6. ... 06-14-2006, 05:01 PM
  1. 06-05-2006 04:22 PM #11
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    Matt,

    The rod bearings were splash only, as I remember. And you still have to deal with the mains.
    Last edited by Henry Rifle; 06-05-2006 at 04:31 PM.
    Jack

    Gone to Texas
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink