Thread: 66 chevy cranks...

Tweet

well... i talked to my dad about it and he wont let me do a blower setup. He will let me do a turbo charger which is fine with me since we are going to redo the entire exhaust system anyway. i know ill probably get forged pistons with a low 8-9 CR. A lean street cam and are there after market cylinder heads for this engine because i have been searching and cant find any. Also any recomendations on anything once again.

with a turbo you'll have to intercool definately, you'll half to let it idle down when you shut it off, which you can run a turbo timer to keep you from hanging with your car for 5 minutes while the turbo cools, you'll have to fabricate an exhaust manifold, and piping, and it'll wear you're engine out faster.... plus i dont know if that 6 cyl will hold 12 pounds of boost...