-
08-09-2006 08:15 AM #1
what is the measurment of the carb mounting flange of a 4bbl squarebore?
I have to make a carb plenum for my '78 Buick turbo as they are no longer available, I will make it out of exhaust pipe and some thick sheet steel but I need to know how many " square the base of a squarebore ( will run a Holley Blower carb ) 4bbl is so I can determin what size exhaust tubing I need. I would measure myself but I don't have a squarebore or even spreadbore carb to check. I know I will increase the curb appeal of my Falcon by turbocharging it and I know I could ask a little more for it after turbocharging it, so now that I have a solid job again, I can start thinking about this again.You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-09-2006 09:44 AM #2
Pick up a gasket at a parts house...If money is the root of all evil... Women must be the fertilizer...
Link to my BAD AST Build Thread:
http://www.clubhotrod.com/suspension...van-build.html
-
08-09-2006 09:47 AM #3
that will work, then I'll save it for when I get everything togther. I never thought of using a gasket for the measurement.You don't know what you've got til it's gone
Matt's 1951 Chevy Fleetline- Driver
1967 Ford Falcon- Sold
1930's styled hand built ratrod project
1974 Volkswagen Super Beetle Wolfsburg Edition- sold
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Thank you Roger. .
Another little bird