Thread: comp cams cam selector software,free

Tweet

Originally Posted by pat mccarthy

i tried to put my 4.610 bore in and my 5.500 crank what the hell no go i will be looking in to the sim dynomation for my christmass

I get 734.4 ci and 1504.37 cc cylinder volume......... That one piston hole is bigger than most motorcycle engines
But for some reason ,comp dont show a cam for that

Originally Posted by shawnlee28

I get 734.4 ci and 1504.37 cc cylinder volume......... That one piston hole is bigger than most motorcycle engines
But for some reason ,comp dont show a cam for that

well i have the cam made.a custom McCARTHY PERFORMANCE grind i just wanted to throw it at the wall and see if it would stick

Originally Posted by pat mccarthy

well i have the cam made.a custom McCARTHY PERFORMANCE grind i just wanted to throw it at the wall and see if it would stick

The biggest hydro roller they have would give ya ,400 hp at 3000 rpm and 900 ftlbs of torque at 1000 rpm .... ....That may be a little under cammed.......

Originally Posted by shawnlee28

The biggest hydro roller they have would give ya ,400 hp at 3000 rpm and 900 ftlbs of torque at 1000 rpm .... ....That may be a little under cammed.......

well i have a solid and is about 800 lift and around 278 IN and more on the ex side on 116lsa i get 972 hp at 6000 and 5500 906 TQ i think i can do abit better but the cam is abit small

The thing I like is that it gives some numbers to play with ,like the 1500 cc per hole on Pats block ,that really puts things in perspective on how large a 735 cubic inch engine really is !!!!!!
I mean ,thats like 8 1500 cc motorcycle engines worth of big block!!