-
08-23-2009 08:22 PM #1
HELP!!!!!!!!Need my power steering to work tommorrow
just bought a rebuilt power steering pump
and its not working,ive bled the lines already,
although my pully does have a slight wobble
since it fell landing on the pully .
It works for a brief moment after i start the
engine but then the steering gets stiff.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-23-2009 09:46 PM #2
I think you have a bum rebuilt unit. These are generally self bleeding. What do you see when you look into the reservour while the engine is running...........is the fluid moving at all? What was the reason you changed out the pump, what was it doing exactly before you replaced it? It could also be your power steering rack, if you have one. Did you see any metallic pieces floating around in the old pump?
Don
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Thank you Roger. .
Another little bird