The block is about good as any of them, might as well use the one you have. 302 rods are good, depending on how hard you're going to run it might want consider a set of aftermarket rods and pistons. Yup on the 2V heads, great setup for the street. You will need to do some work on the water passages in them, if you do a google search for "302 Clevor heads" and some research you should be able to come up with the drawing and measurements.... I've got a copy of it someplace around here but you could more then likely find it faster on a search then I could dig it out of my pile of "important stuff"!!!