Thread: 302 cyl head print (needed!)

Tweet

Hha, ya i know these heads are not the greatest....
I used a cmm machine to answer my own question.
If you were to draw a line down the center of the bolts, the port ends 18.5608mm in one direction, and 12.9901mm in the other. So i took a persentage of that and apllied it to a 1.8inch (h) x 1.32inch (w) port on the flange
I will post a picture once i finish the design

idk if i want to use a ball pean hammer to shape the tube. I sorta want to flare it out useing a press and some custom tools. This would be better for production if i wanted.

I have axcess to a 3 axis cnc machine at school. All i have to do is build it on CAD and convert it to a txt doc. Then i take it over to the cnc.
However i first want to mill it out of wood, to ensure that it fits correctly. I will of course use a wood cnc mill for this, not a metal one.
Just give me a few hours to make a mock up design.
STAY TUNED