Thread: 302 cyl head print (needed!)
Results 1 to 15 of 57
LinkBack URL
About LinkBacksThreaded View
-
11-13-2010 06:18 AM #24
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
herlong must of never used a set of header flange s from any u weld kits ? well most are junk .. i made my own up out of 3/8 cold roll and used the header gasket for lay out i made many as i did build headers for some time. lay them up on the mill stack two sets up at i time use a hole saw and ruffing mill to do the job . i buy them now for the sbc as a guy i know cuts them on a cnc .there are now many that sell just flanges so not a money makerLast edited by pat mccarthy; 11-13-2010 at 07:22 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Christine asked that I post the link to Mike's Obituary -...
We Lost a Good One