Thread: 302 cyl head print (needed!)

Tweet

Sorry fellas, i'v been busy with other car stuff, (blown head gaskets in a 3.8l (88) thunderbird + getting parts for trans) and havnt had time to do much header work.

But here is the wood milled flange i made for a prototype. Its not the best picture because its just off my phone, and i was at a weird angle so the ports LOOK like they dont line up evenly, but i asure you that there is an even amount of port on all sides inside the flange.

i also changed the orginal design alittle. I got rid of the chamfer around the edges, and then i also changed the bottom out side corners to not interfere with the cyl head bolt, as it is in the picture. I'l hopfuly get a final product here soon and post pictures