Thread: 350 Winnie 20' 1981 motor home

Tweet

A 4.0 thumb is the one on a tranny brake button.

Originally Posted by 1gary

A 4.0 thumb is the one on a tranny brake button.

? ok,,, i have one never had the balls to hit it with the 632 on the street after the malt liguor i just may

Originally Posted by pat mccarthy

? ok,,, i have one never had the balls to hit it with the 632 on the street after the malt liguor i just may

Gezzzzzzzz Pat.Sounds like if I send ya malt liquor,you would do that road trip to Roch.Who-Ha.

If Pat and I come up with a engine,I'm lucky that Pat knows where there are virgins that don't need sleeves.

Originally Posted by 1gary

If Pat and I come up with a engine,I'm lucky that Pat knows where there are virgins that don't need sleeves.

yep i pick up some blocks new from engine quest some time ago if you want to go this way i will just have to talk someone out of one i sold him 10 years ago or i know were a good tall deck is.i ran many cams thru the 526 cid i keep getting very hi TQ numbers past 700tq and past 90 percent efficient this is somewhat like real deal i built for a air boat some time ago .when i am done you can have tech or jerry run numbers if you want .techs has the same soft ware? on this engine it puts out 700TQ+ @ 2500 and 400 hp around 3800.i was playing around the efficiency with cams i came up with cams that are not hard to get made.showing 90 percent but theres going to be thremo and friction loss but i have a way around that right now just play with the cam numbers so i can get it to put efficiency off the chart . but there is going to be real world numbers

Just for a matter of ref-here is a pic of the rig:


http://i172.photobucket.com/albums/w...g?t=1297563233

I got a starter button in my 88 firebird!!!!!!

Hey Pat.You still haven't given me a ball park figure on a BBC tall block set-up.

What O/D tranny do you think would hold up???.Not a Gear Vendors O/D.

I did find 3.40's rear end gear set-up for just short of $300.

Originally Posted by 1gary

Hey Pat.You still haven't given me a ball park figure on a BBC tall block set-up.

What O/D tranny do you think would hold up???.Not a Gear Vendors O/D.

I did find 3.40's rear end gear set-up for just short of $300.

well i did not think at was the way you wanted to go ? i work up a price intake to pan and PM you on sunday

Look at this trans---E-Bay 320652649026

And I just made a deal for 20 BBC core blocks

A 4l80 would also make a good trans for you --electronic control and OD also

Originally Posted by jerry clayton

Look at this trans---E-Bay 320652649026

And I just made a deal for 20 BBC core blocks

HEY jerry any got my name on them ? what block 454 mark 4?

Yep mark 4 2 bolt----there aren't any 4 bolters out there--we convert them for the folks that want 4 bolt---but the Dart is serving those kind of customers for the 540-632 crowd

Originally Posted by jerry clayton

Yep mark 4 2 bolt----there aren't any 4 bolters out there--we convert them for the folks that want 4 bolt---but the Dart is serving those kind of customers for the 540-632 crowd

two bolts are fine for the lower dollar 468/496 builds

Yep---some ARP studs and a good align hone--these blocks are lighter than the Darts or late marine blocks----if you wanta dozen or so ---you can set 9 on a pallet on bell housing end---

Originally Posted by jerry clayton

Yep---some ARP studs and a good align hone--these blocks are lighter than the Darts or late marine blocks----if you wanta dozen or so ---you can set 9 on a pallet on bell housing end---

yep i been boring alot of worlds pro blocks and big Ms last month yep heavy . i would be looking at two or 3 for spring thru summer that should cover me if that ok . so i would stop by for luch and shoot some B.S