Thread: 327 engine itake warped?
Results 1 to 15 of 19
LinkBack URL
About LinkBacksHybrid View
-
11-22-2011 05:41 AM #1
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
yes but liked i did post the intake old one could be to small could of been milled alot then you need thicker intake gasket . over milled it can bottom out on the block before sealing on heads
Originally Posted by 1gary
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
11-22-2011 05:51 AM #2
CHR Member
- Join Date
- Jan 2004
- Location
- Auburn
- Car Year, Make, Model: 1937 chevy truck& 33 fordtruck
- Posts
- 3,017
Pat thnks for the input. I don't think .003 off the intake is that much but I did use fel pro gaskets #1207 which are .060 thick with no bettter results. BartKeep smiling, it only hurts when you think it does!
-
11-22-2011 06:08 AM #3
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
NO no no
what i am saying is that intake could of been cut before on the 003 cut have a hard time buy that most of the time it takes more then that . i cut intakes it is not warp at 003 . go back if you want and read #5/#8 
what i posted two things could be going on
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One