Thread: TBI 350 roller set up?
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
12-09-2012 09:24 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
i drilled and tap the block. if you do not you would need a thrust washer to take up the space of the cam retainer plate if using a step nose cam and if so then you need to rework a thust button as the O.D of the button will be to big to fit in the front of the cam gear for the set nose cam and the 1/2 heads on the 5/16 bolts will hit so you will need to go to button head allen screws for if to work . so at this point drilling the two 1/4 nc bolt holes for the cam plate starts looking good. here is the parts i made to use a step nose can in a block with no boss to drill for retaining plateLast edited by pat mccarthy; 12-09-2012 at 09:31 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
The first model car I built was a 32 Ford roadster by Revell in the mid 50's.
How did you get hooked on cars?