Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: TBI 350 roller set up?
          
   
submit
   

Results 1 to 7 of 7

Threaded View

jamesnelizabeth TBI 350 roller set up? 12-09-2012, 07:41 PM
pat mccarthy i drilled and tap the block.... 12-09-2012, 09:24 PM
jamesnelizabeth Nice. I was looking to get... 12-10-2012, 07:32 PM
techinspector1 James, you can't just reach... 12-11-2012, 07:04 PM
pat mccarthy pbm thunder iron head or... 12-10-2012, 07:54 PM
pat mccarthy cam should be ok 12-10-2012, 07:55 PM
pat mccarthy its a roller cam lifters will... 12-12-2012, 03:10 AM
  1. 12-09-2012 07:41 PM #1
    jamesnelizabeth is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Nov 2012
    Location
    pocahontas
    Posts
    11

    TBI 350 roller set up?

     



    I have a TBI 1 pc seal 2 bolt main 350. it has three bosses which i drilled and tapped. i have the spider, dog bones, roller lifters, cam retainer, and all bolts to go with it. parts came from a vortec motor. my issue here is should i drill and tapp for the cam retainer or use a cam button? motor came from a 1994 4x4 c1500 truck and is going into my 1982 c10 and will be converted to carb.
    Attached Images
    Reply With Quote Reply With Quote

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink