Techinspector1,

Putting aside the discussion of the optimum mpg/performance cam, let's get back to the question of lockwashers. I have assembled the TCI four bar assemblies with the bolts just finger tight. The bolts came with nylon locks instead of lockwashers. My question is which side of the nut goes to the outside? Is the nylon supposed to be on the inside and be crushed to a lock? Or is the nylon supposed to be on the outside? IT is much easier to start the nut and put the nylon on the outside. This is a simple question, but I want to get it right.

Don Shillady