Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
10-23-2004 04:36 AM #4
CHR Member
- Join Date
- Dec 2003
- Location
- Pahrump
- Car Year, Make, Model: 1947 International Pick Up
- Posts
- 3,188
I see Dave is still answering all the ford questions.
Yates Racing used to have a kit for this, this was many moons ago though. You can probably still get info from them too.
You'll have to change your crank and rods as well as the heads and intake. I did this twenty some years ago, but i can't remeber all the details. Back then we were calling it a mexican style boss.
Yates used to sell just the plans for doing this or you can buy the stuff from him and just bolt it on. It's not cheap, but you will have one great running motor.
~ Vegas ~
PS almost forgot pistons will be differant too, because of angle
of the valves.Last edited by vara4; 10-23-2004 at 04:49 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One