Thread: Idle mix screws on Edelbrock
-
09-06-2006 06:52 PM #1
Idle mix screws on Edelbrock
What is the rule of thumb adjustment for the idle mix screws on an Edelbrock600 CFM with electric choke?If I knew anything I'd be dangerous.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-06-2006 07:01 PM #2
Start at about 1 1/2 turns out, then adjust with a vacuum gauge for peak vacuum, then in about 1/4 turn works for me.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-22-2009 05:37 AM #3
as dave stated above, this is the proper way to adjust carb. also if you don't have a vac gauge then use a tach and follow the above only open up (turn out) the screws for best i
dle and re set the base idle
daveWRENCHD
Friday and Saturday (4/11 & 12/25) Chris (my wife) and I made the journey to Homestead-Miami Speedway so I could participate in the Florida Power & Light sponsored Electrathon event.:cool: It was...
Electrathon - A Different Kind of...