Originally posted by canibalchicken
Ok I have a 1973 SBC 350 with .040 over size bore. Gapless rings, 1.6 ratio roller rockers. Cam is .453 (I/E) w/ 230 duration. The top of the motor is 1993 TBI intake and heads. It has the computer controled distributor. Where would be my best starting point to set the timing?
if the timing is computer controled there is a plug at the dist. you have to unpluge before you can set the timing. unplug the plug and sat the timing at 5 degrees, plug the plug back up and thats all you need to do.