Hybrid View
-
06-20-2005 04:12 PM #1
Timing
Ok I have a 1973 SBC 350 with .040 over size bore. Gapless rings, 1.6 ratio roller rockers. Cam is .453 (I/E) w/ 230 duration. The top of the motor is 1993 TBI intake and heads. It has the computer controled distributor. Where would be my best starting point to set the timing?Chevys for life
-
06-20-2005 06:30 PM #2
Re: Timing
Originally posted by canibalchicken
Ok I have a 1973 SBC 350 with .040 over size bore. Gapless rings, 1.6 ratio roller rockers. Cam is .453 (I/E) w/ 230 duration. The top of the motor is 1993 TBI intake and heads. It has the computer controled distributor. Where would be my best starting point to set the timing?Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
06-20-2005 07:04 PM #3
Ok cool. I want that at 5 deg before top dead center correct. Also this plug I need to un plug. Is it the one that goes to the coil or to the main wiring harness?Chevys for life
-
06-20-2005 07:25 PM #4
Originally posted by canibalchicken
Ok cool. I want that at 5 deg before top dead center correct. Also this plug I need to un plug. Is it the one that goes to the coil or to the main wiring harness?
ps it will be the plug going into the main harness.Last edited by lt1s10; 06-20-2005 at 07:31 PM.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
06-20-2005 09:42 PM #5
the hot rod is running now. Going to start breaking in the engine tomorrow.
Thanks
I got it set on 5 deg btc. Fantastic!!Chevys for life
-
06-21-2005 05:47 AM #6
thats great canibalchicken, good luck.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?