Thread: Need some timing advice
Results 1 to 15 of 55
LinkBack URL
About LinkBacksThreaded View
-
07-10-2005 09:34 AM #11
CHR Member
- Join Date
- Jul 2005
- Location
- Columbia
- Posts
- 37
ok well i am about to post the pics.. chaging up the camera now.. but here is an update. I have turned out both idle screws primary and scondary and i have also turned in the air mixture screws all the way in and backed them out 1.5 turns. and the motor still idles around 3000.
float level has been checked and no vacum leaks as all the vacum lines are plugged with new stoppers.PCV valve hose is intact with no cracks. ( can a bad PCV valve cause this??? just a thought)
side note: choke lever is disconnected on the carb so the choke does not work.
well let me see if my camera is charged...
thanks
let me know what you all think
Last edited by CaneBreak; 07-10-2005 at 09:43 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I wore a camouflage T-shirt once. The response in the pub was "Oooh, it's a floating head!" .
the Official CHR joke page duel