Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: throttle body spacer?
          
   
   

Results 1 to 8 of 8

Threaded View

  1. 04-03-2007 04:37 PM #3
    threearmsinjune
    threearmsinjune is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianapolis
    Car Year, Make, Model: 79 shovel, 65 pan
    Posts
    133

    This is a fresh rebuild with a very mild cam, installed straight up, because the stocker needed replaced. 112LSA 206/212 @ 0.050 and .434/.444" at the valve. I am running just over 9.25:1 static CR and 17" Hg at idle and 19" at 1000 RPM.

    I have a small list going against me but my budget is getting tight. I am looking to get good info before spending more $. I am using factory '89 GM TBI, manifold and have not updated my chip. Also have factory torque converter. Don't really need big Hp just want to pep it up off idle if I can.
    Last edited by threearmsinjune; 04-03-2007 at 05:22 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink