Thread: won't idle
Results 1 to 15 of 17
Threaded View
-
11-10-2007 03:11 PM #2
to rule out the vacuum leak, spray carb cleaner around the gasket and if the engine rpm is not affected, then no vacuum leak. I have used the carb gaskets numerous times over and over with no problem. I would use carb cleaner to hit the idle passage ways. Not sure if that will cure your problems but I have sprayed cleaner down the carb several times.
this is all to common now days. i've lost a lot of people this year. we're all getting long in the tooth so it is a given. RIP people in N Texas lost a great trans man. Mike Mcgee of Trick Shift...
We Lost a Good One