Thread: Fan Belt

Tweet

Originally Posted by DennyW

That long, you might have to go to a 1/2" belt. Not a lot of difference really.

6856

1/2" x 56"
http://www.brownandwiser.com/belt_most_common.html

this site is a perfect example of the way the part numbers work. 68 is the code for 1/2" and 56 is length in inches, so 6856 is a 1/2"X 56".


you would need a 6956 as 69 is the code for 5/8" which right here it is. available from carquest. http://www.gatespowerpro.com/Comerge...TOKEN=48463828

Belts aren't their listed length. If you measure your old belt with a tape measure, it'll be about 6" longer than what it lists .This is because of the device used to measure them, it has like a half a 3" pulley on each end that the belt goes over. Take your old belt to the store and compare.

It won't do me any good to take the old belt to the store as it is to short Because of my putting on offset on to make room for the suoer duel carb manifold. But thanks for the info on belt lenghts.