Thread: torque converter stall
Results 1 to 6 of 6
LinkBack URL
About LinkBacksHybrid View
-
05-14-2008 06:35 PM #1
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
what set up springs are in the carb? how much do you have in the dist and how much do you have on the crank what rpm are you fully curve at. when will it start to curve .how much timming ? how big of a cam @050 it very well could be the stall i had 4 or so go bad they can hold the engine down sounds like to me you could need more stall must have a big cam? i have cars that idle at 1200 they do drop a whee bit when put in gear alot of the stalls out there are over rated junk .you really do not get a good stall till you hit the $1000+ mark but that could just be meLast edited by pat mccarthy; 05-14-2008 at 08:23 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
The first model car I built was a 32 Ford roadster by Revell in the mid 50's.
How did you get hooked on cars?