Well I would first get the recommended springs for the cam unless the ones you have are within pressures and lift spec'd by Comp. Second you can run the oem rocker setup but it will be marginal at best. You can slot the aluminum stands like the old iron ones to get a little better clamping pressure. I'd make sure you have a good set of rocker stands or the good shafts. Or even better both. I'm assuming your getting adjustables. Check out www.dscmotorsport.com Dennis sells nice spring kits and a few different rocker setups. You can match the lift and pressure on the Comps springs and then pick the rockers to match. Prices are good and many items have specs listed for easy shopping. Spending a little more now will save you major hassles and $$$$$ later. G.