Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
07-11-2003 08:41 PM #1
Registered User
- Join Date
- Jul 2003
- Location
- Grand island
- Car Year, Make, Model: 1976 ford f-100
- Posts
- 1
help!!!
hey guys (and/or gals);
i just put heads from a 1964 ford galaxie on my 1976 f-100 witha 390. after the first try it ran but had an intake gasket leaking, secound time i got the intake gasket leak stopped but can't get the thing to start to save my life. its on #1 tdcc, coil is hooked up, fuel is getting to the carb, etc.... i am drawing a blank on what it might be.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-18-2003 04:06 PM #2
Registered User
- Join Date
- Jul 2003
- Car Year, Make, Model: 68 LTD 4dr htp
- Posts
- 1
basics
Just be sure your simple stuff is covered: Be sure coil is Good, and check all connections. check your points?? Gas or spark is sure to be your prob. Good luck.Bert
-
07-19-2003 07:01 AM #3
CHR Member
- Join Date
- Jul 2003
- Location
- Beaver
- Car Year, Make, Model: 90 Jeep Wrangler
- Posts
- 368
Check timing / dist position. I assume you had it out to fix leak? Might be off 1 tooth or out 180 eegrees.
Was it very late, or the beer too good?Chris
Only the dead fish go with the flow.
-
09-10-2003 09:51 AM #4
CHR Member
- Join Date
- Sep 2003
- Location
- Ottawa, Ontario
- Car Year, Make, Model: 1969 C10 long box
- Posts
- 10
may be funning too rich. The intake leak gave the engine the air it required for the proper mixture.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird