Hi there guys.

I was at a friend of my fathers house today, And had a look in his garage, I had been told that he had a damaged 428 block and crank, So we went over to have a look.

There i found a "1UA" crank, And a block that i by the first sighting cant identify, I did not scrape away pait to look for the "SUPER" stamping on the block.

I have identifyed the crank as a "428 Super CobraJet" crank, And thats good news i guess, It needs to be turned over, Itīs been stored there for over 20 years, On the floor..
Will i be able to use this crank in my 390", Or is it no idea? I dont plan to put "big bucks" into this, Just to make the crank fit.

Because of the damage to the block, I dont know if it will be worth or even possible to repair it, There has been small chips broken of in the bottomend of 2 cylinders, Maybe 9-10 mmīs up into the cylinders. And also small cuts in the cylinderwalls are present.
And i dont know, But i think it has been overbored earlier.
If i can, I will post a picture of the damage tomorrow.


All numbers i could finf on the block, Is the datecode "9B5", And above that an "E".
On the front of the block, Thereīs the standard "352" and above that, "57" is placed.
On the back of the block, Again thereīs "352" but under it this time, "39" is placed.

Anyone who dares to ID the block?

All help is welcome!