Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
11-15-2005 12:11 PM #1
CHR Member
- Join Date
- Dec 2004
- Location
- gainesville
- Car Year, Make, Model: 1973 porsche 914 283 v8 '65 Galaxie 406
- Posts
- 335
lifters?
ok i just tore down my '65 352 and pulled one of the lifters to see if they are soild or hydraulic. there is no hole where the push rod seats for oil and the push rods have no hole going through them for oil either but on the sides of the lifter there are holes are these lifters solid or not i know from my experience with chevy that if they have a hole where the pushrod seats then they are hydraulic.
thanks
TylerHonda Motor= 1.6L
Soda Bottle= 2L
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-15-2005 02:40 PM #2
CHR Member
- Join Date
- Mar 2004
- Location
- fairfield
- Car Year, Make, Model: 68 Cougar S code, 427 Tunnelport.
- Posts
- 942
It sounds like they are hyd lifters. Solids look like little dumb bells. Hyd lifters have a taper about 1/4' from the top and the oil hole is in this area. Some shell style solid lifters have no taper and the oil hole is farther down closer to the bottom. Most 352's are hyd lifter blocks also. But the galleys can be plugged for solids if you wish.
G.
-
11-15-2005 04:59 PM #3
CHR Member
- Join Date
- Dec 2004
- Location
- gainesville
- Car Year, Make, Model: 1973 porsche 914 283 v8 '65 Galaxie 406
- Posts
- 335
thank you that picture really helps thanks fro answering a really dumb questionHonda Motor= 1.6L
Soda Bottle= 2L
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
How much did Santa have to pay for his sleigh? Nothing! It's on the house! .
the Official CHR joke page duel