Thread: timing tab on 65 galaxie 352
Results 1 to 2 of 2
LinkBack URL
About LinkBacksThreaded View
-
07-07-2008 01:23 PM #2
CHR Member
- Join Date
- Feb 2004
- Location
- dayton
- Car Year, Make, Model: 1948 ford anglia
- Posts
- 978
They were there 43 years ago, try lightly sanding the balancer with 320 paper and see if they come up. As far as the tab, I had no tab on my mustang. So I bought a TDC locator, its a 3 inch long brass plug you screw into your #1 plug hole. Then you turn the motor over by hand (with plugs removed) in both directions. Marking the balancer both ways around. Split the difference for your TDC. Then I made my own tab and mounted it to match the mark on the balancer. below is the part.
http://www.jegs.com/i/Crane/270/99412-1/10002/-1Last edited by mooneye777; 07-07-2008 at 01:31 PM.
Live everyday like it were your last, someday it will be.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One