Quote Originally Posted by mikesbigblock View Post
Hi i bought a 66 390 fe engine , it was to be a 390 335 Hp from a 66 Comet Cyclone but when i got it and sent it to the shop to get the block and heads done i found out that it wasnt a 390 but a 352 engine the heads were GT heads, so i had to change the crank and the rods and bore to a 390 now i have every thing ready the heads have been redone with valves and seats and springs , now i need to know what to buy to build a 335 HP or a little biger Hp engine i need to know what cam , lifter set what type rings as i have new pistons flat top i need, timming gears intake carb,etc can someone help as i am new to the building ford engines , this is going into a 66 Comet Cyclone
Thanks from Mike
Check back in Tech Inspectors posts from March,April He did some Dyno-Sim posts on a 390 build,if this will be on the street check out the Crower Cam run.