Quote Originally Posted by sideoiler427 View Post
Mike, sorry about your problem. All galley plugs installed? [10] Install a 5/16 3/4 inch long galley restriction plug beside rocker bolt. drill galley plug to 3/32. The galley that comes up from the cam bearing. Do both sides. there is some good ways to modify oil galleys, when you have a bare block. But you are past that. I drill out galley from oil filter adapter to pump to 1/2 inch. tip block upside down, 12 in. 5/16 drill bit. drill out galley from top of cam bearing to lifter galley. Just so you know.
Sideoiler427,
You've responded to a thread from 2011, and Merc006 was last active 05-06-2012, 8+ years ago. Great information, but I really doubt that Merc006 will see your response.

Welcome to the forum anyway!