Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Edelbrock Torker
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. #1
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    Edelbrock Torker

     



    ok i got a good question, with one of the older eldelbrock torker manifolds(the one that sets the carb twisted a little, will my standard mustang throttle linkage still work.... I've got the alluminum rod linkage, not the cable linkage...

    edit: I've included a picture of the manifold to help...

    Last edited by thesals; 05-31-2005 at 12:20 PM.
    just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day

  2. #2
    Dano78's Avatar
    Dano78 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Vancouver
    Car Year, Make, Model: Fords.. All pre-'78
    Posts
    131

    Should have included a pic of your linkage instead. I like the original Torkers MUCH better than the Torker II. I have one on my '67 Ranchero. I built the linkage for it but I'm betting if yours has a little more adjustment left in it and with a slight bend it will work fine. If not, it's a snap to make another linkage.
    Dan Ouellette
    '25 T C-Cab
    '47 Ford Coupe
    '53 Ford Crestline
    '53 Ford Mainline
    -And 8 more Fords and 2 Mopars

  3. #3
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    thanks for the info, i just ended up buying a brand new airgap and 600cfm performer carb, hopefully they'll run good with my stock HO heads and hydraulic roller cam.... decided to start upgrading the engine while its out of the stang... why not eh?
    just because your car is faster, doesn't mean i cant outdrive you... give me a curvy mountain road and i'll beat you any day

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink