Thread: Engine for 30 "A" Truck project
Results 16 to 17 of 17
LinkBack URL
About LinkBacks-
09-03-2007 02:47 PM #16
CHR Member
- Join Date
- Sep 2007
- Location
- Fresno
- Posts
- 8
You guys have been a great help. Once I get started on this, I will be sure to put on some pictures for you.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-07-2007 06:35 PM #17
CHR Member
- Join Date
- Sep 2006
- Location
- New Lenox
- Car Year, Make, Model: 67 Mstg cpe , 37 Ford Coupe
- Posts
- 2,787
If you not going to run a hood a 94 - 95 mustang serpentine accessory drive is a short water pump . Getting it under a hood is a challenge if your going to run A/C . I am cutting the power steering side and rewelding A/C to the top . If you just run Alternator its a piece of cake . Pic shows it under hood on my A. This puts the 5.0 at the same length as a 350 and gains the move forward . The firewall will only be recessed about 3 or so inches .Last edited by bluestang67; 09-07-2007 at 06:51 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Yep. And I seem to move 1 thing and it displaces something else with 1/2 of that landing on the workbench and then I forgot where I was going with this other thing and I'll see something else that...
1968 Plymouth Valiant 1st Gen HEMI