Geez, fellas!! I can't seem to catch a break of any kind....my parts guys ordered in a new distributor this morning. While waiting for that, I put in the new fuel pump. While dropping the tank I found a weak spot in my tank frame so I welded that up and reinforced it really good. So now the new pump is in, the tank is on, the new distributor is in but still no start. The fuel pressure tester shows zero at the shrader valve. I cycled the pump at least 20 times with the key and still nothing. How much gas is required in the tank for it to pressurize? I might have a little over 2 gallons in there.....thoughts????