Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: more 302 problems
          
   
   

Reply To Thread
Results 1 to 9 of 9
  1. #1
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    more 302 problems

     



    alrighty so i fixed my rocker problem, i have a carb problem, it seems to not choke properly and so it will flood when the engine is warm.... but my real problem is this, sunday night i'm out cruising in my galaxy, the 302 is just pumpin right along no problems and tempature gauge says that its all good, so i get about 20 miles from home and it starts steaming.... so i stop her and open the hood and pull the radiator cap, its empty... the next morning i find out why, a freeze plug(the one behind the motor mount) blew out, anyone know what would cause enough pressure in my cooling system to blow a freeze plug out?

  2. #2
    ljotto1's Avatar
    ljotto1 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Balad Iraq, hittin the streets and towing trucks
    Car Year, Make, Model: 1968/ galaxie
    Posts
    210

    Did it blow out or did it rot away?? It very well could hae rotted away mine did that, and yes it left no trace of the plug.
    It could also be the plug wasnt set in all the way, or your rad. cap was not venting excess presure like it is posed to.

    Otto
    "When the going gets tough the tough say, 'HUG MY NUTS!!!"
    Hug My Nuts Racing

    The Reward for a Job Well Done is...
    ANOTHER JOB!!!

    How many people out there can say they've driven a ferd home with vise-grips instead of a steering wheel??

  3. #3
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    oh it blew out, the engine had just been rebuilt, my idiot friend, who is never working on anything i own again, put the thermostat in backwards.... he wants to be a professional mechanic and i dont think its a good idea, he built my engine as a college project, first he didn't plastigauge the bearings and overtightened them, crank got eaten alive, he broke a timing chain cover, hes broken plug wires, he forgot to put the oil pump drive shaft in, he stripped the flex plate bolt holes on my new crank, he put the thermostat in backwards, and he bought the wrong valves with my money so i had to buy a second set, thats enough to say hes never touching my car again.... but now i think I've fixed everything hes broken and my 69 galaxy is running great, the timing needs to be adjusted a little more but pulling the distributor to get a lil better timing can wait til tomarrow..

  4. #4
    Matt167's Avatar
    Matt167 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Prattsville
    Car Year, Make, Model: '51 Chevy Fleetline and a Ratrod project
    Posts
    4,990

    Originally posted by thesals
    oh it blew out, the engine had just been rebuilt, my idiot friend, who is never working on anything i own again, put the thermostat in backwards.... he wants to be a professional mechanic and i dont think its a good idea, he built my engine as a college project, first he didn't plastigauge the bearings and overtightened them, crank got eaten alive, he broke a timing chain cover, hes broken plug wires, he forgot to put the oil pump drive shaft in, he stripped the flex plate bolt holes on my new crank, he put the thermostat in backwards, and he bought the wrong valves with my money so i had to buy a second set, thats enough to say hes never touching my car again.... but now i think I've fixed everything hes broken and my 69 galaxy is running great, the timing needs to be adjusted a little more but pulling the distributor to get a lil better timing can wait til tomarrow..
    Your gonna get someone else to rebild your engines right?
    You don't know what you've got til it's gone

    Matt's 1951 Chevy Fleetline- Driver

    1967 Ford Falcon- Sold

    1930's styled hand built ratrod project

    1974 Volkswagen Super Beetle Wolfsburg Edition- sold

  5. #5
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,374

    With friends like that, you don't need enemies
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  6. #6
    drg84's Avatar
    drg84 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    Dansville
    Car Year, Make, Model: 1996 Aurora Autobahn edition
    Posts
    1,201

    This guy is in COLLEGE??? "These are the leaders of tomorrow" Were Screwed!
    Right engine, Wrong Wheels

  7. #7
    thesals's Avatar
    thesals is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2004
    Location
    san diego
    Car Year, Make, Model: 66 mustangFB, 69 econline Drag Van
    Posts
    1,527

    yeah, after he screwed up my crank i rebuilt the engine myself which took 2 weeks with about an hour every night.... the only reason i didn't catch the thermostat being in backwards was because i left the housing on the intake manifold. and luckily some college students aren't so bad at building engines. my engine is running excellent now that I've fixed all the problems that were caused by my idiot friend.... now the only problem i need to fix is the air fuel mixture on my carb so I'm not pulling a pathetic 8/mpg

  8. #8
    blade's Avatar
    blade is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2004
    Location
    butler
    Car Year, Make, Model: 37 chevy truck
    Posts
    3

    man does everybody have a friend like that ? i know i do

  9. #9
    shawnlee28's Avatar
    shawnlee28 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2004
    Location
    so.cal
    Car Year, Make, Model: 66 c 10 fleetside longbed
    Posts
    1,942

    C- mon now lighten up !This friend ,hes just tryin to learn how to do it right. Thats why hes in school he dont know how to do it right.What did ya exspect to get from an inexsperianced builder ?u even said the friend admitted it was a project. He was perfectly honest with u as to his talents.Too bad(for u) his college class project just happened to cost u money, parts,time and hassel. Sounds like he aint that dumb to me lol.Just givin u a hard time as I am sure u gave him a hard time!!I am sure he woulda got and earfull if he was my buddy for not following all instructions!!!and i agree with drg84!!!

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink