My 26T Coupe build thread

[roadster32]

not to get picky but i think a would look for better rocker shims then VSI spring shims i would look at stainless steel shims. like T&D JESEL .Crane and others use .McMaster Carr should have some thing better if not use the blue steel spring shims.thats a 030 on there.you can get hard blue steel in some sizes on the rods 015 short is a lot but i know a guy that has a pin boring machine that a EZ fix if you can float the pin

You got me Pat, what shims do you mean ???

[pat mccarthy]

You got me Pat, what shims do you mean ???

along side of your rocker arms on your rocker shaft is a VSI spring shim

[roadster32]

along side of your rocker arms on your rocker shaft is a VSI spring shim

Ah, we call them thrust washers here.

[pat mccarthy]

Ah, we call them thrust washers here.

well there made by VSI it s for shimming up valve springs and your washer are 030 thick. but what ever

[roadster32]

Pat that was one thing i didn't like about this setup but having spoke to Marty at MTS he has assured me its all ok, We will see

well there made by VSI it s for shimming up valve springs and your washer are 030 thick. but what ever

[pat mccarthy]

Pat that was one thing i didn't like about this setup but having spoke to Marty at MTS he has assured me its all ok, We will see

hey just giving you a heads up. as a guy that builds and machines engine for a living there better shim to use

[roadster32]

Thanks for the heads up Pat, I will change them.

hey just giving you a heads up. as a guy that builds and machines engine for a living there better shim to use