Thread: 51 Moredoor

Tweet

Lots done today; I finally got the fuel line run and the fuel pump on. Now just need to run from the pump to the carb and that's done. I wanted to use a GM alternator since the harness was already wired for it so I flipped the alternator bracket upside down and put it on the othe side of the water pump. I had to cut and lengthen the adjuster bracket and build a support bracket for the back but it worked out good. I started putting the front clip back on just to see what I was going to need to do with the inner fenders. Both had to get sliced and diced a bit but I've got some new pieces tacked in place so I can pull it back apart, finish welding and paint them before it goes together for good.