Thread: 51 Moredoor

Tweet

I wrapped up several things over the last few days. It started out as changing out leaf spring bushings as they were shot and clunking pretty bad when you hit any kind of bump. I didn't realize it until I got going but the bumper had to come back off to get the spring shackles out. Then I realized that my fuel tank was leaking from an undetermined spot. So off came the tank and the bumper. After cleaning up the wet spot on the tank I found a couple of little pinholes. It looks like some rust pitting had started. Weird; only one small spot; the rest of the tank looked solid. So i rinsed the tank several times with hot water and Dawn and was able to weld the pinholes shut. Just for good measure I used some fiberglass mat and resin over the questionable area. Hopefully this will work long term; I did the same thing on an old fuel tank years ago and it held for several years. A new tank isn't in the budget right now. I also put the truck weatherstripping on. This all made a huge difference; it drives so much better with the front end adjusted, the sway bar, and the new spring bushings. Now for some new tires, the rest of the trim, and for now I decided to run a set of original 49 Plymouth hubcaps.