Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree573Likes

Thread: 51 Moredoor
          
   
   

Reply To Thread
Results 1 to 15 of 984

Hybrid View

  1. #1
    stovens's Avatar
    stovens is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2007
    Location
    Petaluma
    Car Year, Make, Model: 48 Ford F1
    Posts
    9,793

    400's are nice big blocks. My brother had a 68 Firebird with a high performance 400 engine, that would squeal rubber at 60 mph if you hit the gas, the gas gauge would also take a dive!
    Last edited by stovens; 08-22-2015 at 02:53 PM.
    " "No matter where you go, there you are!" Steve.

  2. #2
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Quote Originally Posted by stovens View Post
    400's are nice big blocks. My brother had a 68 Firebird with a high performance 400 engine, that would squeal rubber at 60 mph if you hit the gas, the gas gauge would also take a dive!
    I had a Poncho 400 in a 70 Grand Prix SJ and remember the same scenario; great power and loved to guzzle fuel.

    I did some prep work tonight; I couldn't find the right oil pump pickup for the rear sump pan anywhere as it's out of production and the pan itself was hard enough to come by. So I just welded on a 6" extension and it looks like it will work and clear the crank fine. Also pulled out the clutch pedal as I'm going with a 727 trans, pulled out the 5/16" fuel lines and pulled off the exhaust. I hope to get the short block together next week if the machine shop gets my pistons put on the rods.
    Attached Images
    1 Corinthians 1:27

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink