Welcome to Club Hot Rod! The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.

» Members from all over the US and the world!
» Help from all over the world for your questions
» Build logs for you and all members
» Blogs
» Image Gallery
» Many thousands of members and hundreds of thousands of posts!

YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show

Like Tree

3390Likes

Thread: 55 Wagon Progress

       Tweet


submit

Results 1 to 15 of 1865

LinkBack
- LinkBack URL
- About LinkBacks
Thread Tools
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

MP&C 55 Wagon Progress 01-10-2013, 07:27 PM

falconvan Looks good! I thought about... 01-11-2013, 04:34 AM

40FordDeluxe Nice metal working! 01-11-2013, 03:25 PM

MP&C Thanks for the comments guys!... 01-12-2013, 01:09 PM

cffisher Its the little things that... 01-12-2013, 01:28 PM

rspears That's one of those subtle... 01-12-2013, 01:29 PM

edward g. p. Yes that does look sweet,... 01-12-2013, 04:01 PM

randyr Robert, Amazing work as... 01-12-2013, 05:45 PM

MP&C Thanks, The Eastwood clamps I... 01-12-2013, 05:54 PM

randyr Is your wire size for the... 01-12-2013, 07:36 PM

MP&C Oops, forgot that... .035. ... 01-12-2013, 07:43 PM

Dave Severson Nice work, but I've got to... 01-13-2013, 06:50 AM

MP&C Using no gap is largely for... 01-13-2013, 11:32 AM

Dave Severson I guess what you refer to as... 01-13-2013, 02:48 PM

MP&C I refer to hammer welding as... 01-13-2013, 03:54 PM

MP&C Had a few minutes this... 01-16-2013, 05:24 PM

bluestang67 Did you have to replace the... 01-21-2013, 07:45 PM

More replies below current depth...

falconvan Looking good, Robert! 01-30-2013, 04:58 AM

MP&C Thanks for all the likes and... 02-02-2013, 04:12 PM

MP&C started the prep for shaving... 02-09-2013, 05:07 AM

rumrumm That is some nice metal work,... 02-14-2013, 09:41 AM

MP&C Thanks! Well after the 390... 02-17-2013, 06:14 PM

MP&C Back to welding... All... 02-19-2013, 07:31 PM

MP&C Tonight's accomplishment,... 02-24-2013, 07:23 PM

randyr Great work, Robert!!! I... 02-24-2013, 10:38 PM

MP&C Started back in the wagon... 03-24-2013, 06:59 PM

randyr So that's how you do... 03-24-2013, 07:03 PM

Hot Rod Nick This is shaping up to be a... 03-24-2013, 07:19 PM

randyr Hey Robert, if you had the... 03-24-2013, 07:32 PM

MP&C You could use the same basic... 03-24-2013, 07:36 PM

rspears Robert, I know the most... 03-25-2013, 06:59 AM

MP&C Most times you'll have wider... 03-25-2013, 07:58 AM

rumrumm You metal work is very... 03-25-2013, 06:48 AM

rspears Thanks for the reply. My... 03-25-2013, 11:03 AM

40FordDeluxe Robert, very nice metal work!... 03-25-2013, 11:30 AM

MP&C Roger, IMO 1/16 would be too... 03-25-2013, 11:43 AM

rspears I agree, I was simply saying... 03-25-2013, 01:40 PM

cffisher In the past I used the... 03-25-2013, 12:27 PM

Dave Severson Paint stick and a penny is... 03-25-2013, 03:15 PM

rspears Paint stick plus a penny... 03-25-2013, 03:27 PM

Dave Severson That's a thick paint... 03-25-2013, 04:02 PM

MP&C Continuing on to the driver's... 03-26-2013, 07:09 PM

40FordDeluxe Wow, great work! Thanks for... 03-26-2013, 07:33 PM

johnboy I hear ya...quite agree.... 03-26-2013, 09:55 PM

MP&C Ok, one side left to go... ... 03-28-2013, 08:11 PM

40FordDeluxe Wow, very nice work! That... 03-28-2013, 10:57 PM

bluestang67 Robert great coverage and... 03-29-2013, 07:29 AM

MP&C Thanks for the comments... 04-03-2013, 07:29 PM

40FordDeluxe Robert, excellent anvil! That... 04-03-2013, 07:37 PM

MP&C Ryan, some of those home-made... 04-11-2013, 07:57 PM

cffisher time and patients great work 04-12-2013, 02:13 PM

40FordDeluxe Great work! You sure make it... 04-12-2013, 05:04 PM

MP&C You should see the scrap... 04-13-2013, 07:19 PM

MP&C Starting on the tailpan, we... 04-15-2013, 07:32 PM

40FordDeluxe Holly cow! Great work. I... 04-15-2013, 07:37 PM

MP&C The tail pan and rear opening... 04-19-2013, 06:06 PM

MP&C ....and finishing the... 04-19-2013, 08:20 PM

MP&C Thought I'd spend some time... 05-07-2013, 06:47 PM

40FordDeluxe That looks amazing! I just... 05-08-2013, 05:29 PM

MP&C Thanks! I'd say your welder... 05-10-2013, 08:22 AM

406Rich Wish I had learned to weld... 05-10-2013, 08:28 AM

randyr Beautiful work once again,... 05-10-2013, 08:40 AM

MP&C Where I normally use a cutoff... 05-10-2013, 09:34 AM

40FordDeluxe I was wondering if you used a... 05-10-2013, 02:47 PM

MP&C Thanks! Not too much shop... 05-12-2013, 06:01 PM

MP&C Been a busy couple weeks... 05-27-2013, 07:32 PM

ojh Great work Robert, its' those... 05-29-2013, 05:48 AM

MP&C Worked today to finish up the... 06-07-2013, 08:17 PM

MP&C Next on the list for the... 07-14-2013, 07:29 PM

40FordDeluxe Very nice work, and cool... 07-15-2013, 04:47 PM

falconvan Excellent metal work, Robert! 07-15-2013, 06:09 PM

MP&C Thanks guys! Took the... 07-18-2013, 08:33 PM

40FordDeluxe Spot welds can sure be a PITA... 07-19-2013, 01:14 PM

MP&C It seems every time I used... 07-19-2013, 06:58 PM

34_40 WOW... I still find that work... 07-20-2013, 03:29 AM

40FordDeluxe Holly cow! You do impeckable... 07-23-2013, 02:20 PM

MP&C Thanks for the comments guys.... 09-18-2013, 08:16 PM

randyr Thanks, Robert! Every post is... 09-18-2013, 09:54 PM

34_40 What R2 said!! I was happy... 09-19-2013, 03:55 AM

40FordDeluxe I have to agree! I know very... 09-23-2013, 02:02 PM

MP&C Thanks for the comments... 09-29-2013, 05:28 PM

falconvan Fantastic job, you should... 09-29-2013, 05:53 PM

MP&C Heck, I can hardly get this... 09-30-2013, 07:51 PM

The Bat Thank you,really enjoy see... 09-29-2013, 10:10 PM

rspears Amazing! Thanks for sharing... 10-01-2013, 04:29 AM

40FordDeluxe I would have a pile of scrap... 10-01-2013, 11:54 AM

Whiplash23T Simply amazing to be able to... 10-01-2013, 02:51 PM

glennsexton Once again, the quality of... 10-01-2013, 04:55 PM

MP&C Thanks for the comments guys.... 10-10-2013, 08:41 PM

Dave Severson Nice work as always, Robert! ... 10-11-2013, 02:28 AM

MP&C Thanks Dave! Well... 10-11-2013, 07:39 PM

MP&C Now to address the mounting... 10-12-2013, 08:36 PM

34_40 Ingenious! Amazing!... 10-13-2013, 02:44 AM

rspears Ditto Mike's comment. Thanks... 10-13-2013, 05:53 AM

The Bat Love the way ya do that... 10-14-2013, 07:26 PM

MP&C Thanks for the comments guys,... 10-17-2013, 05:41 AM

BBB i have been reading your post... 12-23-2020, 06:23 AM

MP&C Can you quote the post they... 12-23-2020, 07:58 AM

MP&C Found them... That was some... 12-23-2020, 08:33 AM

40FordDeluxe Wow, such great work! I... 10-17-2013, 03:19 PM

MP&C Thanks! Back to the lift... 10-24-2013, 07:43 PM

40FordDeluxe Looking real nice! 10-25-2013, 01:28 PM

MP&C Thanks! Finishing up the... 10-26-2013, 02:14 PM

Whiplash23T Wow mate, that is beautiful... 10-26-2013, 02:33 PM

MP&C Thanks for the question. I... 10-26-2013, 07:29 PM

bluestang67 Good process and very little... 10-26-2013, 08:53 PM

MP&C The epoxy does discolor... 11-01-2013, 08:14 PM

cffisher As always Great work 11-02-2013, 08:20 AM

RichB Iv'e followed your posts on... 11-02-2013, 08:27 AM

MP&C Thanks guys! Tonights... 11-02-2013, 09:12 PM

34_40 Once again you make it look... 11-03-2013, 01:34 AM

MP&C Moving on to the next task,... 11-07-2013, 08:11 PM

Dave Severson Nice work Robert!!!! ... 11-08-2013, 06:51 AM

40FordDeluxe Great work! I just used the... 11-08-2013, 01:56 PM

MP&C Dave, thanks for the offer,... 11-08-2013, 08:02 PM

MP&C Another slight detour.... I... 11-16-2013, 08:55 PM

34_40 Pretty cool.. 50 pounds of... 11-17-2013, 03:24 AM

MP&C I did have two pair of vice... 11-17-2013, 05:33 AM

34_40 Thanks for the info Bob. And... 11-17-2013, 06:03 AM

40FordDeluxe Great work, and I love your... 11-19-2013, 02:01 PM

MP&C They were a McMaster Carr... 11-19-2013, 03:21 PM

stovens Wow! Just went thru this... 11-20-2013, 01:05 AM

MP&C Thanks! With the epoxy... 11-22-2013, 07:25 PM

MP&C Laying out the ends for... 11-23-2013, 07:20 PM

cffisher Nice work. Some times making... 11-24-2013, 10:52 AM

MP&C Very true. About twice as... 11-24-2013, 04:51 PM

40FordDeluxe Wow, I hope guys with your... 12-03-2013, 06:34 PM

MP&C The torch is a Henrob, but I... 12-04-2013, 04:17 AM

rspears Cobra is correct on the... 12-04-2013, 05:16 AM

firebird77clone That cobra deluxe kit is .. ... 12-04-2013, 07:58 AM

rspears I bought regulators from the... 12-04-2013, 09:18 AM

stovens Pretty neat setup, never... 12-04-2013, 10:31 AM

geezer69 just had a good look at this... 12-05-2013, 10:00 PM

MP&C Sorry for my short hiatus... 12-28-2013, 04:55 PM

MP&C Sometimes you just need to... 01-02-2014, 05:48 PM

MP&C Was in the middle of media... 01-05-2014, 03:38 PM

randyr Wow, Robert!! As I always... 01-05-2014, 05:20 PM

chopt50wgn Been following this project... 01-06-2014, 02:43 AM

MP&C Thanks guys! Had a... 01-08-2014, 07:47 PM

stovens Your work is outstanding, I... 01-08-2014, 09:14 PM

MP&C Thanks! Continuing with... 01-11-2014, 02:23 PM

cffisher Like the 1" ? bar for holding... 01-11-2014, 03:04 PM

40FordDeluxe Very nice work sir! I highly... 01-14-2014, 01:56 PM

MP&C I just use the butt clamps to... 02-06-2014, 08:12 PM

34_40 Wow! what a piece of work.. ... 02-07-2014, 05:54 AM

MP&C The ER70S-7 I used was .035,... 02-07-2014, 05:58 AM

34_40 Thanks for that info.. I'll... 02-07-2014, 06:03 AM

MP&C Yes, those pics are as of... 02-07-2014, 06:06 AM

stovens Nice work, and thanks for the... 02-07-2014, 10:55 AM

40FordDeluxe Awesome work. That spot... 02-07-2014, 05:41 PM

MP&C This one is a Miller 220v... 02-07-2014, 06:41 PM

40FordDeluxe Thanks for the info. I was... 02-08-2014, 08:20 AM

MP&C So we're either both right or... 02-08-2014, 10:06 AM

40FordDeluxe I'm sure you're right and we... 02-09-2014, 08:59 AM

Deuce4dad Thanks so much for taking the... 02-09-2014, 04:01 PM

MP&C I'm just glad I'm so slow. ... 02-16-2014, 07:48 PM

stovens Fantastic detail and... 02-16-2014, 10:33 PM

34_40 So the "EZ" wire......... ... 02-17-2014, 04:36 AM

MP&C Roger, it's a continual... 02-17-2014, 06:19 AM

rspears Robert, One thing I enjoy... 02-17-2014, 05:20 AM

34_40 Great info, thanks again! 02-17-2014, 06:25 AM

Whiplash23T May I ask why you prefer... 02-17-2014, 12:38 PM

MP&C You get used to something and... 02-17-2014, 07:00 PM

MP&C Well this evening was a short... 02-17-2014, 07:47 PM

lamin8r Nice job,Robert.. love... 02-18-2014, 12:32 AM

Dave Severson Great work as always! Goes... 02-18-2014, 06:48 AM

40FordDeluxe Great repair, that looks... 02-19-2014, 08:22 AM

Jack F Thanks for these welding... 02-19-2014, 09:30 AM

MP&C Some more cleanup work on the... 02-24-2014, 07:10 PM

40FordDeluxe That looks amazing! I... 02-25-2014, 04:56 PM

MP&C But think of the... 03-01-2014, 11:28 AM

rspears I really enjoy seeing the... 03-01-2014, 11:55 AM

MP&C You'll notice I used that... 03-01-2014, 02:14 PM

NTFDAY I have an old pair like... 03-01-2014, 02:36 PM

cffisher your idea was better than... 03-01-2014, 05:02 PM

40FordDeluxe Great work. I like to see... 03-06-2014, 05:17 PM

MP&C Not much progress to show,... 03-09-2014, 07:03 PM

BAM55 Beautiful work as always. Its... 03-09-2014, 08:12 PM

Jack F As mentioned before, I love... 03-10-2014, 10:16 AM

MP&C Thanks for the comments guys.... 03-15-2014, 06:04 PM

NTFDAY In the latest issue of Rod &... 03-15-2014, 06:20 PM

lamin8r Awesome stuff,Robert.. Love... 03-16-2014, 01:47 AM

Navy7797 Love your metal work ! 03-16-2014, 07:54 AM

Jack F NTFDAY, Just finished... 03-16-2014, 09:08 AM

MP&C Guys, I'll agree that cutting... 03-17-2014, 07:08 PM

Jack F Robert, Thanks for that... 03-18-2014, 08:04 AM

MP&C Many guys have those contour... 03-18-2014, 09:52 AM

cffisher A block of wood the height of... 03-18-2014, 11:27 AM

40FordDeluxe Thanks for that tip guys! I... 03-18-2014, 04:28 PM

MP&C Trying to finalize the rear... 03-31-2014, 07:39 PM

stovens Very nice work! 04-01-2014, 10:25 AM

cffisher Do you now have to reflange... 04-01-2014, 11:41 AM

MP&C Yes, the re-flanging is done... 04-01-2014, 12:36 PM

MP&C Here's the tools used to... 04-01-2014, 02:36 PM

cffisher Very nice as always TOOLS... 04-01-2014, 06:07 PM

40FordDeluxe Wow great work, and I really... 04-01-2014, 06:51 PM

rspears Ditto! The hand made tools,... 04-02-2014, 04:51 AM

Navy7797 Very slick use of the vise... 04-07-2014, 04:31 AM

MP&C Here's the build detail on... 04-07-2014, 03:04 PM

40FordDeluxe Nice work! 04-07-2014, 05:09 PM

MP&C Worked tonight on building... 04-15-2014, 08:08 PM

34_40 As always, Good Work. Are... 04-16-2014, 02:51 AM

MP&C No, I have a firewall tray... 04-16-2014, 03:28 AM

40FordDeluxe Very nice work! 04-17-2014, 02:49 PM

lamin8r Very nice work,Robert.. Love... 04-17-2014, 10:58 PM

MP&C Had a bit of time in the shop... 04-23-2014, 06:35 PM

BAM55 Beautiful work man, simply... 04-24-2014, 08:49 AM

40FordDeluxe X2!!! Looks saweet! 04-24-2014, 11:42 AM

The Bat Thanks,always fun looking in... 04-25-2014, 12:25 PM

cffisher Great looking stuff Time and... 04-25-2014, 12:59 PM

lamin8r Yup,,as above..Truly... 04-25-2014, 10:53 PM

MP&C Thanks for the comments guys.... 04-30-2014, 07:18 PM

40FordDeluxe That looks great! Looking... 05-05-2014, 11:53 AM

MP&C Thanks! Spent this past... 05-06-2014, 09:16 PM

stovens What a cool Class! I wish we... 05-07-2014, 10:21 AM

40FordDeluxe Very cool and thanks for... 05-07-2014, 01:06 PM

34_40 As the others have said,... 05-07-2014, 01:37 PM

MP&C The tuck tool wasn't mine, it... 05-07-2014, 02:48 PM

40FordDeluxe Robert, thanks for that. I... 05-07-2014, 03:56 PM

MP&C Another item to get crossed... 05-24-2014, 01:23 PM

stovens Nice patch! 05-25-2014, 10:12 AM

40FordDeluxe Very nice work! 05-29-2014, 05:33 PM

sharpmark nice job on what seems an... 05-29-2014, 10:33 PM

August Mariner Ditto - (The message you have... 05-30-2014, 07:19 AM

August Mariner As a student I am asking: On... 06-06-2014, 02:27 PM

MP&C That would have been a viable... 06-08-2014, 08:41 PM

MP&C A few months ago, I had... 06-08-2014, 08:43 PM

August Mariner Thanks for taking the time to... 06-09-2014, 04:55 AM

rspears Now that's Master... 06-09-2014, 04:38 AM

August Mariner I use to wonder what all the... 06-09-2014, 05:02 AM

cffisher I like the magnet on the... 06-09-2014, 05:46 AM

stovens Very nice work sir! 06-09-2014, 09:03 AM

MP&C Thanks for the comments guys.... 06-13-2014, 04:23 AM

August Mariner Thanks for adding to your... 06-13-2014, 05:01 AM

40FordDeluxe More great work sir! You make... 06-13-2014, 01:12 PM

34_40 Thank You Robert. It is... 06-13-2014, 06:05 PM

firebird77clone Ya might consider having some... 06-14-2014, 04:04 AM

Jack F Just a guess here but I think... 06-14-2014, 07:29 AM

MP&C Nothing that I've bought... ... 06-14-2014, 10:59 AM

cffisher Everyone has a drawer where... 06-14-2014, 02:41 PM

stovens Yup! Got my retactable... 06-15-2014, 11:17 AM

Navy7797 Out standing ! Thanks for... 06-17-2014, 05:51 AM

firebird77clone I really am wondering how... 06-17-2014, 07:15 AM

MP&C It's got some starting where... 06-17-2014, 07:25 AM

cffisher That makes it more pleasant... 06-17-2014, 02:26 PM

MP&C Yes, much! Doesn't look... 06-19-2014, 05:50 AM

40FordDeluxe Thanks for that link! It'd be... 06-20-2014, 12:18 PM

cffisher Got my parts store getting me... 06-20-2014, 02:13 PM

MP&C A slight diversion from the... 07-13-2014, 08:04 PM

stovens Very clever!:D 07-13-2014, 08:33 PM

MP&C Just to catch up on the... 08-11-2014, 04:50 AM

DJ3100 I found this thread a while... 07-14-2014, 07:10 AM

MP&C DJ, well here's some more... 07-14-2014, 07:46 AM

MP&C Still practicing at the Tig... 07-19-2014, 08:32 PM

Jack F Robert, what size electrode... 07-20-2014, 08:52 AM

MP&C Jack, it was .040. 07-20-2014, 11:09 AM

Jack F Thanks Robert, It's time for... 07-21-2014, 07:18 AM

40FordDeluxe Great work as usual!!! I just... 07-20-2014, 09:08 AM

stovens looks pretty slick to me! :) 07-20-2014, 10:21 AM

MP&C Be sure to post up your... 07-21-2014, 12:27 PM

cffisher Robert I have to say THANKS... 08-05-2014, 03:01 PM

MP&C Glad to hear it Charlie, I'd... 08-05-2014, 08:48 PM

40FordDeluxe Great work! Your knob repair... 08-11-2014, 11:53 AM

MP&C Any excuse to play in the... 08-14-2014, 04:14 AM

40FordDeluxe Very nice. I have some plans... 08-14-2014, 11:44 AM

MP&C Ryan, be glad to answer any... 08-20-2014, 05:31 AM

40FordDeluxe Very nice. I need to get some... 08-20-2014, 11:13 AM

stovens Is it spelled DyKem? 08-20-2014, 11:59 AM

40FordDeluxe It probably is. I just took a... 08-20-2014, 12:30 PM

MP&C machinists & sheet metal guys... 08-20-2014, 12:40 PM

stovens Good to know! 08-21-2014, 08:49 AM

sprayed99 Your passes doing a bit of... 08-21-2014, 07:58 PM

MP&C Yeah, sometimes you have to... 08-24-2014, 08:31 PM

40FordDeluxe Great work on all of it! 08-25-2014, 11:10 AM

34_40 As always, Thank You Robert.... 08-25-2014, 04:28 PM

johnboy What he said. 08-25-2014, 10:30 PM

MP&C Thanks for the comments guys.... 08-26-2014, 07:36 AM

MP&C The shop's new apprentice... 08-28-2014, 05:46 AM

Dave Severson Just a note on using a finger... 08-28-2014, 06:54 AM

MP&C :LOL::LOL: Just to... 08-28-2014, 07:40 AM

August Mariner I was told, long ago that, if... 08-28-2014, 09:16 AM

cffisher I use a soft cloth like a... 08-28-2014, 10:57 AM

stovens Ice little factoid for future... 08-28-2014, 05:37 PM

MP&C Today we worked on tying up... 08-30-2014, 02:39 PM

40FordDeluxe Very nice! The LH bottom rear... 09-02-2014, 05:17 PM

MP&C On a painted car, this... 09-03-2014, 07:38 PM

randyr I used that same method on my... 09-03-2014, 07:44 PM

lamin8r An old telephone book works... 09-13-2014, 01:27 AM

HWORRELL Matching the lower anvils of... 09-22-2014, 02:08 PM

MP&C This was basically a... 09-22-2014, 06:32 PM

stovens Very nice work. Cool solution... 09-04-2014, 09:19 AM

40FordDeluxe Wow, great work and thanks... 09-04-2014, 12:35 PM

MP&C More progress today, working... 09-06-2014, 05:16 PM

40FordDeluxe Great work and thanks for... 09-08-2014, 03:31 PM

MP&C Thanks! Tonight we... 09-10-2014, 07:19 PM

firebird77clone Adds meaning to DO THE DEW! 09-11-2014, 04:28 AM

40FordDeluxe Great work! I really need to... 09-11-2014, 12:01 PM

cffisher A must have tool when doing... 09-11-2014, 01:21 PM

MP&C Ryan, the bead roller is one... 09-11-2014, 07:17 PM

August Mariner Great work as always. Thanks... 09-12-2014, 11:34 AM

stovens I like the purple people... 09-12-2014, 01:40 PM

40FordDeluxe That purple looks very nice!... 09-12-2014, 02:05 PM

stovens Telephone book? What's that?... 09-13-2014, 09:54 AM

MP&C While Kyle was working on... 09-17-2014, 08:24 PM

40FordDeluxe That planishing tool is very... 09-18-2014, 10:56 AM

August Mariner Think all the members will... 09-19-2014, 01:36 PM

MP&C I think I'll have to join in... 09-20-2014, 02:05 PM

stovens I will toastyou too! 09-20-2014, 02:53 PM

40FordDeluxe Looking very nice! 09-22-2014, 12:57 PM

HWORRELL O.K. got it now, appreciate... 09-23-2014, 06:28 AM

MP&C Glad to help! I used to... 09-24-2014, 07:30 PM

40FordDeluxe Very nice work. It's looking... 09-24-2014, 11:27 PM

cffisher That tweaking device get a... 09-25-2014, 05:18 AM

MP&C Today we worked on filling... 09-27-2014, 03:36 PM

MP&C As Kyle media blasted and... 10-01-2014, 07:05 PM

34_40 You make it look so easy..... 10-02-2014, 05:47 AM

Jack F Robert, does anything ever... 10-02-2014, 05:48 AM

MP&C Thanks guys. Sometimes I... 10-02-2014, 07:38 AM

stovens We like the McGyuyver... 10-02-2014, 08:54 AM

40FordDeluxe Very nice work! I agree the... 10-02-2014, 10:45 AM

Jack F McGuyver 100, Corner 0.;):):)... 10-03-2014, 06:25 AM

stovens Here's a few MacGuyver quotes... 10-03-2014, 09:22 AM

MP&C :LOL: Those are pretty... 10-05-2014, 06:32 PM

The Bat Enjoy your step by step. My... 10-05-2014, 06:45 PM

40FordDeluxe More great work. Most places... 10-06-2014, 12:13 PM

MP&C Thanks for the comments guys.... 10-08-2014, 07:57 PM

40FordDeluxe Nice new welder. I've had an... 10-08-2014, 11:56 PM

34_40 I was thinking the same... 10-09-2014, 04:16 PM

MP&C Camera perspective. The edge... 10-16-2014, 04:52 AM

MP&C More progress today, part of... 10-18-2014, 05:41 PM

cffisher that closes nice 10-18-2014, 06:56 PM

MP&C Yeah, I was worried about... 10-22-2014, 08:05 PM

MP&C More progress today, some of... 10-25-2014, 08:11 PM

Henry Rifle I love the Starliner. I... 10-25-2014, 09:24 PM

cffisher thanks for the pictures Loved... 10-25-2014, 09:50 PM

34_40 lots of great pics of your... 10-26-2014, 03:41 AM

Jack F Another great how/to post, am... 10-26-2014, 08:12 AM

stovens How much is one of those... 10-26-2014, 09:40 AM

36 sedan This is the one I have Hand... 10-26-2014, 11:06 AM

jerry clayton McMaster-Carr... 10-26-2014, 10:08 AM

stovens Thanks Jerry, have to... 10-26-2014, 11:05 AM

stovens Thanks 36 Sedan. I didn't... 10-26-2014, 11:50 AM

MP&C The rivnut tool shown is... 10-27-2014, 06:36 AM

MP&C A slight diversion, as the... 10-29-2014, 06:59 PM

MP&C Picked up a new shop clock at... 11-01-2014, 03:08 PM

MP&C Worked some more on the... 11-01-2014, 08:56 PM

stovens looks nice and solid 11-02-2014, 09:19 AM

MP&C More progress on the welding... 11-05-2014, 07:47 PM

MP&C Rivnut installation video! ... 11-07-2014, 08:14 PM

MP&C More progress this evening on... 11-07-2014, 08:38 PM

34_40 That's a pretty sweet cart. ... 11-08-2014, 02:55 AM

stovens Fully loaded portable welding... 11-08-2014, 09:35 AM

MP&C OK, one last welder to add... 11-08-2014, 11:34 AM

Jack F I now have a new project for... 11-09-2014, 08:18 AM

MP&C Jack, sorry to be a bad... 11-12-2014, 07:34 PM

MP&C Okay, got the welding cart... 11-16-2014, 06:03 PM

stovens WOW!!!!!!!!!!!!!!!!!!!!!!!!!!!... 11-16-2014, 06:12 PM

MP&C Thanks Well today was a... 11-22-2014, 09:21 PM

34_40 Thanks! (as always..) but... 11-23-2014, 04:31 AM

Jack F Robert, beautiful work. Just... 11-23-2014, 07:29 AM

stovens I was thinking the same... 11-23-2014, 09:11 AM

MP&C Cutoff wheel to make an... 11-23-2014, 07:42 AM

MP&C Well I thought we were done... 11-27-2014, 09:49 PM

MP&C oops... double post 11-27-2014, 09:53 PM

MP&C Got some pictures this... 11-29-2014, 09:25 PM

MP&C Parts all re-assembled, ready... 11-30-2014, 10:43 AM

stovens excellent repair. 11-30-2014, 12:19 PM

MP&C Now that the bus parts are... 12-03-2014, 07:49 PM

firebird77clone I once blasted a 64 C10 grill... 12-03-2014, 08:56 PM

40FordDeluxe Nice work on the bus! Once... 12-05-2014, 02:20 PM

MP&C While I was doing the family... 12-06-2014, 08:58 PM

MP&C While Kyle continued media... 12-13-2014, 03:29 PM

34_40 I guess the old saying "they... 12-14-2014, 03:12 AM

MP&C Goes to show why most of... 12-18-2014, 04:25 AM

40FordDeluxe Nice work as always. 12-18-2014, 11:38 AM

MP&C Thanks! Why is it... 12-21-2014, 10:49 AM

stovens Wow you continue to dazzle us... 12-21-2014, 10:57 AM

randyr Yes, the desires for... 12-21-2014, 12:11 PM

rspears What he said. Always look... 12-21-2014, 01:21 PM

MP&C Thanks for the comments guys.... 12-21-2014, 04:56 PM

MP&C One of our projects for... 12-23-2014, 07:54 PM

40FordDeluxe Merry Christmas to you and... 12-24-2014, 01:11 PM

34_40 Merry Christmas MP&C! Thanks... 12-24-2014, 05:10 PM

johnboy Exactly! What he said. ... 12-24-2014, 08:17 PM

bluestang67 Took a while to catch up here... 12-25-2014, 06:51 AM

MP&C Thanks for all the comments... 12-26-2014, 08:17 PM

cffisher Those carbide cutters leave... 12-27-2014, 06:07 PM

MP&C My hands are usually a magnet... 12-28-2014, 02:59 PM

MP&C Working on the inner part of... 01-02-2015, 10:09 AM

40FordDeluxe Very nice! 01-02-2015, 12:38 PM

MP&C Thanks! I also took... 01-02-2015, 01:32 PM

40FordDeluxe That would be a bad deal!... 01-02-2015, 05:55 PM

Navy7797 Great Job on that door ! ... 01-03-2015, 11:45 AM

MP&C I think most all of the 30's... 01-03-2015, 08:22 PM

MP&C Today Kyle worked on prepping... 01-04-2015, 03:30 PM

MP&C Sneak preview of the powder... 01-07-2015, 07:25 PM

johnboy The idea of scoring the patch... 01-07-2015, 08:01 PM

40FordDeluxe You make it look easy. Great... 01-07-2015, 08:39 PM

MP&C Thanks guys! More... 01-11-2015, 04:34 PM

34_40 As always... NICE! 01-11-2015, 06:52 PM

johnboy What he said. 01-11-2015, 08:27 PM

40FordDeluxe Your work looks like it was... 01-12-2015, 11:48 AM

MP&C Thanks guys! Tonight... 01-14-2015, 07:41 PM

johnboy That's one mighty fine trick... 01-14-2015, 07:48 PM

40FordDeluxe Great work. The heat wave... 01-14-2015, 10:01 PM

cffisher 30 would be a heat wave here. 01-15-2015, 07:20 PM

stovens It would be night time here!... 01-16-2015, 08:42 AM

MP&C Kyle finishing up the prep on... 01-18-2015, 02:52 PM

40FordDeluxe That looks awesome! I think I... 01-19-2015, 05:18 PM

MP&C This evening while we had... 01-19-2015, 07:54 PM

Jack F Robert, you have inspired me... 01-20-2015, 04:45 PM

August Mariner Paint! I couldn't be more... 01-21-2015, 12:01 PM

MP&C Thanks guys, here's some more... 01-21-2015, 07:28 PM

40FordDeluxe Wow, that could have been a... 01-21-2015, 07:43 PM

MP&C Sorry I'm a little late... 01-25-2015, 04:41 PM

MP&C I've had guys ask what primer... 01-28-2015, 08:03 AM

stovens Wow! The hammer test got my... 01-28-2015, 09:47 AM

MP&C Now take that info and a... 01-28-2015, 09:56 AM

MP&C Tonight's update. We took... 01-28-2015, 07:59 PM

pepi Always enjoy watching the... 01-30-2015, 12:03 PM

MP&C Thanks, we can only hope so! ... 01-31-2015, 04:11 PM

MP&C We noticed the driver's side... 02-02-2015, 07:55 PM

RichB Great work as usual! Rich 02-03-2015, 06:12 AM

stovens Ditto above 02-03-2015, 11:07 AM

johnboy Yep. What they said. 02-03-2015, 08:43 PM

40FordDeluxe Great work. It's pieces like... 02-04-2015, 02:08 PM

MP&C Thanks fellas! I had a... 02-04-2015, 08:40 PM

MP&C Today Kyle needed to start... 02-07-2015, 05:09 PM

MP&C Someone noticed we use some... 02-10-2015, 06:56 AM

stovens Great finds. I too use some... 02-10-2015, 10:33 AM

40FordDeluxe Great work! It's looking nice... 02-11-2015, 06:10 PM

MP&C Thanks for the comments! ... 02-11-2015, 07:40 PM

MP&C A while back we had made the... 02-12-2015, 07:22 PM

MP&C Not much to show on our... 02-14-2015, 06:27 PM

MP&C We had an early schedule... 02-16-2015, 04:47 PM

40FordDeluxe Nice work. Mr.Customer should... 02-17-2015, 02:45 PM

MP&C Ms. Customer.... ;) 02-17-2015, 04:16 PM

MP&C Well Kyle skipped out on me... 02-18-2015, 07:31 PM

firebird77clone Skipped out? Well you... 02-18-2015, 11:52 PM

MP&C Then there'd be two of us... 02-19-2015, 01:13 PM

34_40 Well then, tell Kyle Happy... 02-19-2015, 04:18 PM

40FordDeluxe That is a nice piece of... 02-20-2015, 06:06 PM

MP&C Hi, my name's Robert, and I'm... 02-21-2015, 04:48 AM

34_40 Hello Robert! 02-21-2015, 05:13 AM

MP&C Today Kyle finished up... 02-21-2015, 08:17 PM

34_40 Shame about the house.. make... 02-22-2015, 03:37 AM

stovens Wow you do houses tooo! Nice... 02-22-2015, 09:29 AM

MP&C Yeah, I wish the better half... 02-22-2015, 02:00 PM

40FordDeluxe That stinks to see the... 02-24-2015, 07:20 PM

MP&C We lucked out in that I was... 02-26-2015, 04:38 AM

MP&C Our upholsterer stopped by... 03-05-2015, 04:45 AM

40FordDeluxe Great work on those panels! 03-05-2015, 04:37 PM

one bad 51 merc Robert. I hope you don't... 03-13-2015, 09:53 AM

MP&C Larry, so true. I have had... 03-16-2015, 05:34 AM

MP&C Tonight's shop progress. Got... 03-19-2015, 08:33 PM

MP&C Spent the past few days at... 03-16-2015, 05:31 AM

mrmustang test to see if this thread is... 03-22-2015, 01:46 PM

34_40 I've no explanation as to why... 03-22-2015, 06:35 PM

randyr Mike, you were probably... 03-22-2015, 06:45 PM

34_40 Watching Robert and Kyle... 03-22-2015, 06:57 PM

MP&C This past Saturday started at... 03-23-2015, 03:34 AM

rspears Looks right at home, like... 03-23-2015, 05:47 AM

MP&C Yeah, the clean floor is... 03-23-2015, 05:57 AM

MP&C Got some electrical work done... 03-23-2015, 08:42 PM

34_40 great tip on the shear! Now... 03-24-2015, 04:00 PM

randyr Shear genius.....:D 03-24-2015, 05:08 PM

34_40 Oh Groan! ... 03-24-2015, 05:24 PM

Bob Parmenter That Randy is such a cut... 03-25-2015, 07:09 AM

40FordDeluxe The shear looks really nice... 03-25-2015, 06:12 PM

MP&C Ha! He's taking up my slack... 03-25-2015, 07:38 PM

40FordDeluxe Very nice! Tool boxes and... 03-26-2015, 12:00 PM

MP&C Our Saturday progress had us... 03-28-2015, 09:48 PM

MP&C As Kyle was going through the... 04-04-2015, 07:48 PM

stovens Fantastic work as always! 04-05-2015, 09:00 AM

40FordDeluxe Great work and that is a... 04-06-2015, 07:45 AM

MP&C Got to do all you can to keep... 04-07-2015, 08:18 PM

MP&C Last night we got the recess... 04-09-2015, 03:51 AM

40FordDeluxe That is really nice! Your... 04-09-2015, 02:17 PM

34_40 Times 10! What he said.. ... 04-09-2015, 04:11 PM

MP&C Yeah, but that attention to... 04-11-2015, 06:44 PM

stovens Sweet. It would be fun to... 04-12-2015, 09:32 AM

40FordDeluxe Great work! It seems those... 04-14-2015, 01:44 PM

OHMY34 I love your attention to... 04-14-2015, 02:51 PM

MP&C Thanks for the comments guys.... 04-15-2015, 04:15 AM

34_40 Please give Brad 2 thumbs up... 04-15-2015, 06:20 PM

MP&C This shows a more accurate... 04-16-2015, 04:33 AM

40FordDeluxe Brad's car is awesome! I got... 04-16-2015, 10:50 AM

MP&C I'll have to get a video done... 04-16-2015, 07:46 PM

MP&C Got a care package in the... 04-18-2015, 08:47 PM

RichB Good stuff as always, Thanks... 04-19-2015, 07:15 AM

MP&C Thanks Rich! Kyle got... 04-21-2015, 08:06 PM

August Mariner You need to start your own... 04-22-2015, 06:32 AM

36 sedan Great idea! But, the producer... 04-22-2015, 06:36 AM

stovens Not to mention that you... 04-22-2015, 10:11 AM

34_40 Maybe a silly question... 04-22-2015, 03:45 PM

MP&C Com'on, it's getting 40... 04-22-2015, 05:51 PM

MP&C Finishing up on the radio... 04-25-2015, 09:57 PM

34_40 Ah.. thanks for the info.. 04-26-2015, 01:47 AM

MP&C Today was the Spring Fling... 04-26-2015, 09:13 PM

stovens Love the Tomatoe strippped... 04-27-2015, 11:09 AM

34_40 I agree with you, the outer... 04-27-2015, 05:09 PM

NTFDAY FWIW, my 76 Vette has round... 04-27-2015, 05:13 PM

cffisher My 72 C10 has a horizontal... 04-27-2015, 06:29 PM

rspears Wasn't that pretty much a... 04-28-2015, 07:29 AM

randyr While I agree with the... 04-28-2015, 06:41 AM

firebird77clone My 69 chevelle nomad has the... 04-28-2015, 08:23 AM

MP&C First, thanks to all for... 04-29-2015, 04:24 AM

rspears More excellent work, and... 04-29-2015, 05:14 AM

Deuce4dad I noticed Kyle's weld... 04-29-2015, 07:31 AM

glennsexton Every time I read through... 04-29-2015, 10:02 AM

MP&C Thanks for the kind words... 04-30-2015, 08:03 PM

34_40 I'd still vote for the... 05-01-2015, 03:06 AM

NTFDAY I would go with the round... 05-01-2015, 03:50 AM

randyr Well, since you are asking... 05-01-2015, 07:12 AM

MP&C Randy, here I'm trying to get... 05-05-2015, 04:01 AM

stovens Or how about a hidden panel... 05-01-2015, 08:21 AM

Henry Rifle Round ones. The square ones... 05-01-2015, 09:29 AM

34_40 Or useing the idea from R2.. ... 05-01-2015, 01:54 PM

NTFDAY That can be refoiled and I... 05-05-2015, 04:23 AM

MP&C They are just over $10 each,... 05-08-2015, 06:06 AM

Deuce4dad If Kyle can master tig... 05-08-2015, 06:41 AM

stovens Wow you guy really pay... 05-08-2015, 08:41 AM

MP&C Thanks for taking time to... 05-14-2015, 08:19 PM

MP&C Some more details to iron out... 05-18-2015, 09:44 AM

Jack F Just a thought, couldn't you... 05-19-2015, 07:57 AM

Jack F Another thought:rolleyes:;),... 05-19-2015, 08:18 AM

randyr You've made the radio... 05-19-2015, 08:32 PM

firebird77clone Can you get a windshield with... 05-20-2015, 05:33 AM

stovens This one comes with 13... 05-20-2015, 09:38 AM

MP&C Thanks for all the ideas... 05-22-2015, 06:18 AM

40FordDeluxe Great work and good luck on... 05-22-2015, 04:27 PM

MP&C Sorry for the slight hiatus,... 06-01-2015, 07:09 PM

40FordDeluxe Great work! Man, that was off... 06-02-2015, 01:29 PM

MP&C Ryan, it was a quick trip for... 06-07-2015, 07:59 PM

rumrumm This continues to be one of... 06-10-2015, 06:07 AM

randyr Interesting how simply adding... 06-10-2015, 06:19 AM

MP&C Like lipstick on a pig! ... 06-12-2015, 02:41 PM

randyr Well, if you say... 06-12-2015, 05:07 PM

MP&C Well isn't that Purdy! ... 06-16-2015, 07:46 PM

40FordDeluxe Nice work on the light... 06-12-2015, 05:34 PM

rspears Sorry to see that you had... 06-16-2015, 08:19 PM

40FordDeluxe Sorry to hear of the bad... 06-17-2015, 12:37 PM

34_40 I can't really decide if I... 06-17-2015, 05:20 PM

rspears I've gotta admit, my first... 06-17-2015, 05:26 PM

randyr Do kids today even know how... 06-19-2015, 08:58 PM

MP&C TBH, I'm not sure if I like... 06-19-2015, 08:44 PM

MP&C More progress on the wagon,... 06-28-2015, 06:59 PM

stovens Looks great. What is the... 06-29-2015, 08:01 AM

40FordDeluxe Great work! That epoxy lays... 06-29-2015, 01:18 PM

MP&C Kyle learning the fine art of... 06-30-2015, 09:22 PM

stovens Thanks for the sanding info,... 07-01-2015, 08:43 AM

Henry Rifle He's using SPI epoxy sealer. ... 07-01-2015, 12:11 PM

stovens Thanks Jack most excellent... 07-01-2015, 12:22 PM

MP&C Wet sanded with 600 ... 07-05-2015, 03:48 PM

stovens Awesome finish! 07-05-2015, 04:34 PM

johnboy What he said x 2 07-05-2015, 10:53 PM

34_40 Times 3! Awesome work. 07-06-2015, 03:21 PM

MP&C Thanks guys! Scott is... 07-09-2015, 07:46 PM

MP&C Doesn't seem like much to... 07-14-2015, 09:33 PM

stovens Great work as usual! 07-15-2015, 08:56 AM

34_40 Interesting for me was your... 07-15-2015, 04:53 PM

MP&C I have the transfer punches... 07-15-2015, 05:28 PM

34_40 C'mon.. any one who works... 07-15-2015, 05:41 PM

MP&C I'm going to blame it on... 07-16-2015, 04:31 AM

40FordDeluxe Thanks for posting that! I... 07-16-2015, 01:47 PM

34_40 Check it out. I use the... 07-16-2015, 05:18 PM

MP&C I was blocking out the... 07-19-2015, 04:46 AM

firebird77clone I had to read the halo effect... 07-19-2015, 06:55 AM

MP&C Yes, the pointed corner at... 07-19-2015, 09:59 AM

MP&C Another job in the shop,... 07-19-2015, 02:08 PM

34_40 Well.. I guess if ya gotta... 07-19-2015, 02:59 PM

MP&C Yeah, surprisingly so.... ... 07-26-2015, 08:58 PM

stovens Looks fantastic! 07-27-2015, 08:56 AM

MP&C Thanks! Tonight's post... 08-04-2015, 07:49 PM

40FordDeluxe Nice work Robert! Are you... 08-05-2015, 01:08 PM

MP&C We can see the light, but... 08-05-2015, 03:36 PM

Navy7797 thanks for the posting I like... 08-05-2015, 06:42 PM

34_40 YEP! What he said!! 08-06-2015, 04:50 PM

MP&C I've received some PM's on... 09-12-2015, 02:56 PM

MP&C Thanks fellas! Well there... 09-12-2015, 02:54 PM

40FordDeluxe Nice work and thanks for the... 09-14-2015, 11:41 AM

RichB What great posts,I always... 09-14-2015, 05:46 PM

True Spirit Looks good keep up the good... 09-15-2015, 10:32 AM

MP&C Thanks guys! The last time... 09-15-2015, 07:19 PM

stovens Wow your attention to detail... 09-16-2015, 08:30 AM

MP&C Thanks! Todays... 09-19-2015, 06:19 PM

stovens That's cool, I was given a... 09-19-2015, 06:30 PM

MP&C Nice Anvil! We're... 09-26-2015, 10:15 PM

MP&C Getting ready for the metal... 09-29-2015, 07:58 PM

MP&C A few of the projects showed... 09-30-2015, 08:35 PM

firebird77clone Ooohh, I like the... 09-30-2015, 09:40 PM

MP&C Here are some of the... 10-01-2015, 07:26 PM

firebird77clone Sorry I missed it! 10-01-2015, 08:56 PM

stovens Cool metal working /shaping... 10-02-2015, 07:45 AM

40FordDeluxe The shop looks great! I'm... 10-02-2015, 11:24 AM

RichB It's great your helping pass... 10-02-2015, 04:59 PM

MP&C Thanks for checking in guys.... 10-02-2015, 07:18 PM

MP&C Project updates for todays... 10-03-2015, 08:34 PM

stovens Like the crab "claw hammer"... 10-04-2015, 09:18 AM

firebird77clone Was it the crab whom embossed... 10-04-2015, 11:08 AM

MP&C Yes, up until the break.... ... 10-04-2015, 09:15 PM

MP&C Final update of the class,... 10-05-2015, 07:15 AM

stovens Why would you want to lead... 10-05-2015, 08:31 AM

MP&C For an aluminum vehicle it... 10-05-2015, 08:34 AM

rspears So if the back side were... 10-05-2015, 08:42 AM

MP&C An aluminum car has the same... 10-06-2015, 04:13 AM

stovens Ah now that makes sense,... 10-05-2015, 08:40 AM

firebird77clone Thanks for sharing. Very... 10-05-2015, 02:40 PM

36 sedan And the old becomes the new,... 10-06-2015, 04:36 AM

MP&C Finishing up the scooter... 10-08-2015, 09:02 PM

34_40 You guys do some amazing ... 10-09-2015, 06:16 PM

stovens And you make it look easy. I... 10-10-2015, 09:20 AM

RichB What an amazing class, and... 10-10-2015, 08:01 PM

MP&C Thanks for the comments guys,... 10-13-2015, 08:29 PM

MP&C Well, more welding, grinding,... 10-15-2015, 08:06 PM

40FordDeluxe Are you selling the shirts to... 10-16-2015, 11:22 AM

MP&C Yes and yes... 10-16-2015, 01:32 PM

40FordDeluxe Robert, PM me details I'd... 10-16-2015, 05:24 PM

MP&C Yes, up to 3X.. Well... 10-17-2015, 11:33 AM

stovens So cool to be able to do what... 10-17-2015, 05:47 PM

34_40 X2! Amazing to watch you... 10-18-2015, 03:31 AM

MP&C Thanks! Kyle was off... 10-20-2015, 08:33 PM

MP&C Here's the top side of the... 10-22-2015, 07:45 PM

34_40 Great Pics.. Thanks. And... 10-23-2015, 05:43 PM

MP&C We're trying to stay on top... 10-27-2015, 04:31 AM

40FordDeluxe That quarter looks amazing!... 10-27-2015, 02:21 PM

34_40 Yep.. that's the word.. ... 10-27-2015, 05:23 PM

MP&C Thanks guys, but I think the... 11-01-2015, 07:40 AM

MP&C Had a early Chevy hood side... 11-03-2015, 08:05 PM

rspears That's very cool! I had never... 11-03-2015, 08:40 PM

firebird77clone I'd only seen a picture of... 11-03-2015, 10:09 PM

RichB I like it! I like it! I like... 11-04-2015, 08:58 AM

Jack F I was starting to worry what... 11-04-2015, 09:49 AM

Jack F What to do? 11-04-2015, 09:51 AM

MP&C This will be the next... 11-04-2015, 10:03 AM

Jack F Thanks for the link Robert, I... 11-05-2015, 07:23 AM

40FordDeluxe Great work! Haha, I've had... 11-05-2015, 12:54 PM

MP&C Well FedEx showed up today... 11-05-2015, 08:04 PM

MP&C The more I looked at our... 11-07-2015, 02:46 PM

Henry Rifle Too bad. A lot of work and a... 11-07-2015, 02:59 PM

stovens Thanks for sharing how to... 11-07-2015, 04:52 PM

34_40 Yes, what he said! As... 11-07-2015, 05:01 PM

MP&C Thanks for the comments guys.... 11-09-2015, 06:59 AM

stovens Looks like a nice gouge... 11-09-2015, 07:31 AM

stovens Ignore the above question, I... 11-09-2015, 07:36 AM

34_40 OOOOOOooooo.. payin dues... 11-09-2015, 03:05 PM

Jack F Nice gouge:HMMM:, but I'm... 11-10-2015, 08:10 AM

MP&C So far so good, nothing green... 11-10-2015, 07:57 PM

40FordDeluxe Nice work! Good luck on the... 11-11-2015, 12:37 PM

34_40 So far so good, nothing green... 11-11-2015, 03:22 PM

MP&C They make a pocket kit for... 11-11-2015, 04:12 PM

34_40 AHHHhhhhh,,, I see said the... 11-11-2015, 05:30 PM

40FordDeluxe Aww, that now explains the... 11-12-2015, 12:00 PM

MP&C More prep and welding on the... 11-12-2015, 08:15 PM

40FordDeluxe Nice work! The bus looks like... 11-12-2015, 11:25 PM

MP&C We'll cut out the damage and... 11-17-2015, 08:12 PM

MP&C Still working the frame,... 11-19-2015, 08:59 PM

34_40 As soon as I read the first... 11-20-2015, 02:29 PM

40FordDeluxe I realy like the crutch idea!... 11-20-2015, 05:58 PM

MP&C Kyle got the welds finished... 12-01-2015, 08:28 PM

40FordDeluxe Looks like you're staying... 12-03-2015, 02:48 PM

MP&C Too busy Ryan! We've... 12-04-2015, 08:42 PM

firebird77clone Custom suspension components... 12-04-2015, 09:34 PM

MP&C The disc conversion on the 55... 12-04-2015, 09:48 PM

MP&C Here's what we had to contend... 12-05-2015, 06:50 PM

rspears That's important work, paying... 12-05-2015, 07:40 PM

40FordDeluxe That is coming along very... 12-06-2015, 11:53 PM

MP&C Thanks guys! Well our... 12-07-2015, 08:14 PM

MP&C Finished the welding of the... 12-08-2015, 08:30 PM

MP&C The braces for behind the... 12-10-2015, 08:05 PM

firebird77clone You make it look easy. 12-10-2015, 09:03 PM

MP&C Thanks! This one has been a... 12-12-2015, 04:47 PM

34_40 Wow that's nice. 12-12-2015, 05:00 PM

MP&C Thanks! Cody Walls drove... 12-12-2015, 05:32 PM

stovens Wow you guys make it look so... 12-12-2015, 07:28 PM

Navy7797 Wow that's great metal work,... 12-12-2015, 08:36 PM

RichB Amazing metal work you... 12-13-2015, 03:32 AM

34_40 I can only echo the previous... 12-13-2015, 05:02 AM

jerry clayton So is that a Phase converter... 12-13-2015, 08:49 AM

MP&C Thanks for all the comments... 12-13-2015, 09:04 AM

40FordDeluxe Wow, great work! The louvers... 12-14-2015, 11:58 AM

MP&C Thanks! The other night... 12-19-2015, 03:30 PM

40FordDeluxe Great work! 12-21-2015, 02:44 PM

MP&C Thanks! Dropped it off... 12-21-2015, 06:36 PM

34_40 Great job with the bus.. ... 12-22-2015, 04:26 PM

40FordDeluxe That sand/media does find... 12-22-2015, 06:20 PM

MP&C Yeah, it was still coming out... 12-22-2015, 07:54 PM

firebird77clone Don't waste a drop. 12-22-2015, 08:14 PM

stovens Yup Ditto it looks like new!... 12-22-2015, 10:30 PM

MP&C Thanks guys! The frame... 12-24-2015, 02:46 PM

Jack F Robert, from that last pic... 12-25-2015, 09:41 AM

MP&C Jack, sorry, missed your... 12-29-2015, 08:49 PM

stovens Nice work. i LIKE THE HEATER... 12-25-2015, 10:13 AM

MP&C In the winter weather, the... 12-27-2015, 04:04 PM

34_40 great color for the wheels! ... 12-27-2015, 04:46 PM

MP&C They would see you coming for... 12-29-2015, 08:45 PM

34_40 Best part is they are NOT... 12-30-2015, 02:41 AM

johnboy Wash your mouth with... 01-01-2016, 11:18 AM

MP&C Uh-oh... here we go.... ... 01-01-2016, 05:50 PM

40FordDeluxe Great work and nice fixtures... 12-30-2015, 01:07 PM

MP&C Today Kyle worked on getting... 01-02-2016, 08:21 PM

MP&C Well tonight we worked on... 01-05-2016, 08:32 PM

MP&C Getting the front end put... 01-09-2016, 09:58 PM

MP&C Here's a video taken... 01-10-2016, 08:30 AM

Jack F Robert, when taking a reading... 01-10-2016, 08:59 AM

rspears Robert, two things really... 01-10-2016, 08:58 AM

MP&C Jack, with housing stationary... 01-10-2016, 11:22 AM

HWORRELL A much over looked detail.... 01-27-2016, 01:59 PM

Jack F Robert, thanks for that... 01-11-2016, 08:36 AM

MP&C Well Kyle was mostly on his... 01-12-2016, 07:20 PM

MP&C Some Hoosier Profile parts... 01-13-2016, 03:45 PM

MP&C Getting things ready for the... 01-19-2016, 07:49 PM

firebird77clone Crimping pliers. So that's... 01-19-2016, 09:27 PM

MP&C They come in handy in putting... 01-21-2016, 07:55 PM

MP&C Well after the weekend off... 01-26-2016, 08:03 PM

MP&C For those that followed the... 01-27-2016, 05:15 AM

rspears That is simply beautiful!... 01-27-2016, 05:52 AM

randyr I'm already here and planning... 01-27-2016, 08:24 AM

34_40 :rolleyes: And I'm not saying... 01-27-2016, 01:16 PM

MP&C Randy, get plenty of pictures! 01-27-2016, 08:32 AM

rspears ... and of Ken Thurm's new... 01-27-2016, 08:44 AM

MP&C That's exactly where that... 01-28-2016, 08:02 PM

stovens Pictures not coming up for... 01-29-2016, 11:22 AM

rspears Strange, they were all there... 01-29-2016, 12:31 PM

40FordDeluxe Very nice work! 01-28-2016, 10:16 PM

40FordDeluxe Man, those fenders look so... 01-28-2016, 10:20 PM

MP&C Photobucket doing... 01-29-2016, 05:54 PM

johnboy They were here when I checked... 01-29-2016, 08:20 PM

stovens They are definately here now.... 01-29-2016, 08:43 PM

40FordDeluxe It must be PB. I've had this... 01-29-2016, 09:14 PM

MP&C We worked Sunday this past... 02-01-2016, 09:12 PM

MP&C Tonight's update, Headers... 02-04-2016, 08:19 PM

40FordDeluxe Great work! The chassis... 02-04-2016, 11:27 PM

34_40 Great save! Somehow I just... 02-05-2016, 01:19 AM

Jack F More tricks of the trade... 02-05-2016, 07:39 AM

jerry clayton I think your... 02-05-2016, 08:36 AM

rspears http://i5.photobucket.com/albu... 02-05-2016, 08:57 AM

MP&C Jerry, thanks. Yep, someone... 02-05-2016, 08:47 AM

jerry clayton Is this an external balanced... 02-05-2016, 09:36 AM

MP&C Stroked motor with 400 crank.. 02-05-2016, 12:32 PM

jerry clayton and it was balanced with that... 02-05-2016, 02:59 PM

MP&C Jerry, you got me. She... 02-05-2016, 05:33 PM

jerry clayton Does it have an external... 02-05-2016, 06:08 PM

MP&C Will be pulling the trans and... 02-05-2016, 06:51 PM

jerry clayton Are you kinda out in the... 02-05-2016, 07:53 PM

MP&C Thanks, will get some pics... 02-05-2016, 08:07 PM

MP&C Flex plate PN, it does have... 02-06-2016, 05:50 AM

jerry clayton that looks normal---------but... 02-06-2016, 09:18 AM

MP&C First off, thanks to all who... 02-07-2016, 05:35 PM

Kiwi37 Regarding header clearance, I... 02-07-2016, 11:27 PM

MP&C Just trying to play it... 02-11-2016, 07:55 PM

rspears Thinking about it, the ears... 02-12-2016, 06:01 AM

firebird77clone I'm confident you'll take the... 02-11-2016, 09:16 PM

34_40 I agree with Mr.Spears, don't... 02-12-2016, 05:51 PM

MP&C Yesterday we took delivery on... 02-13-2016, 03:05 PM

Navy7797 I'm very curious as to how... 02-13-2016, 04:33 PM

MP&C I'll dig up the info and get... 02-14-2016, 09:04 AM

MP&C Still haven't gotten the... 02-16-2016, 08:30 PM

RichB More impeccable work, I love... 02-17-2016, 06:32 AM

34_40 NNVG... gotta love it! ... 02-17-2016, 12:44 PM

MP&C Thanks Guys! Well soon... 02-21-2016, 04:32 PM

cffisher Question.. Why the hose... 02-21-2016, 07:41 PM

MP&C To allow for caliper... 02-21-2016, 07:46 PM

MP&C The Mini Cooper wheel... 02-23-2016, 08:00 PM

MP&C With the wheel hub faced, the... 02-25-2016, 07:28 PM

Capecreations21 I was referred to the post... 10-12-2016, 02:50 PM

34_40 HMmmmmm.. I gotta see this... 02-26-2016, 12:04 PM

MP&C Worked on some louvers... 03-01-2016, 08:04 PM

firebird77clone Send me your practice pieces.... 03-01-2016, 09:07 PM

MP&C You should see the scrap... 03-02-2016, 05:32 AM

RichB Does relieving the tooling... 03-02-2016, 07:51 AM

MP&C Rich, I don't think I'm that... 03-02-2016, 08:02 AM

MP&C Here's the next practice... 03-03-2016, 08:00 PM

Henry Rifle Awesome work. I had a '72... 03-03-2016, 08:46 PM

MP&C Jack, if all your louvers... 03-05-2016, 04:31 PM

MP&C After finishing the louvers... 03-05-2016, 05:03 PM

RichB Wow, those louvers came out... 03-05-2016, 05:10 PM

MP&C Thanks Rich! Well most... 03-07-2016, 09:50 AM

stovens never seen a front drum like... 03-07-2016, 11:43 AM

MP&C TMK it's a disc cover 03-07-2016, 11:56 AM

MP&C Adding the rear axle vent... 03-08-2016, 06:54 PM

johnboy Weld it back together. It'll... 03-08-2016, 07:54 PM

firebird77clone Just square off that last... 03-08-2016, 08:38 PM

cffisher I've done that with a ruller... 03-09-2016, 05:16 AM

MP&C We started on an ashtray... 03-12-2016, 06:56 PM

34_40 Whew! I didn't have a clue... 03-13-2016, 03:32 PM

MP&C Kyle continued on reshaping... 03-15-2016, 07:09 PM

34_40 Amazing! Thanks for the pics... 03-15-2016, 07:17 PM

firebird77clone To each his own of course,... 03-15-2016, 07:55 PM

stovens Always amazed at metal work... 03-15-2016, 08:38 PM

MP&C Thanks guys! Spent... 03-16-2016, 08:06 PM

40FordDeluxe More great work and I'm sure... 03-17-2016, 02:16 PM

MP&C Can't wait! The front... 03-17-2016, 07:23 PM

40FordDeluxe Very nice! Where do you buy... 03-17-2016, 10:34 PM

MP&C Ryan, It was ordered from... 03-19-2016, 07:40 PM

MP&C Tonight Kyle did some more... 03-22-2016, 07:24 PM

MP&C First off, yes, it's still... 03-23-2016, 08:14 PM

MP&C Finishing up on the English... 03-26-2016, 11:55 PM

36 sedan A little disappointed in you... 03-27-2016, 07:58 AM

rspears From Post #795, 03-27-2016, 08:49 AM

36 sedan Post #796 kinda makes it... 03-27-2016, 08:59 AM

MP&C C'mon guys, that's better... 03-27-2016, 05:21 PM

36 sedan Slacker!!!!!!!!! Lol.. 03-27-2016, 06:55 PM

firebird77clone Y'all keep it up you're gonna... 03-28-2016, 08:11 PM

MP&C Chrome? Now there's an... 03-29-2016, 08:01 PM

RichB I would love to have you try... 03-30-2016, 09:12 AM

MP&C Well I'm back from UK, Kyle... 04-12-2016, 08:01 PM

firebird77clone Eeesh. Don't catch the edge... 04-12-2016, 11:06 PM

MP&C Thanks! Sorry for the... 05-04-2016, 09:37 PM

stovens very cool. Envious of your... 05-05-2016, 09:43 AM

34_40 Dang.. it musta been hard... 05-05-2016, 05:55 PM

MP&C The slick makes the wheeling... 05-05-2016, 09:30 PM

34_40 AHHhhhh... thank you sensei... 05-06-2016, 07:47 AM

MP&C Punched some louvers this... 05-10-2016, 09:13 PM

stovens Nice work as usual and thanks... 05-10-2016, 11:09 PM

40FordDeluxe Man, that is awesome! Great... 05-11-2016, 12:13 PM

MP&C Thanks guys. I did have a... 05-15-2016, 09:37 PM

34_40 Wow.... just wow! Thanks... 05-16-2016, 04:52 AM

MP&C Well with a nice radius on... 05-18-2016, 08:44 PM

MP&C Well last night's efforts saw... 05-20-2016, 04:53 AM

34_40 Robert. On items like the... 05-20-2016, 05:00 AM

MP&C Those were powder coated. We... 05-20-2016, 06:16 AM

34_40 Thanks (as always) for the... 05-20-2016, 11:03 AM

MP&C I've got a pretty good... 05-23-2016, 04:14 AM

40FordDeluxe Awesome work! You even had to... 05-25-2016, 12:55 PM

MP&C Thanks! Well the two... 05-26-2016, 08:02 PM

stovens Wow what a long way you guys... 05-27-2016, 09:27 AM

40FordDeluxe That looks great! I hope the... 05-27-2016, 11:54 AM

MP&C Thanks! Well, no primer just... 05-29-2016, 10:27 PM

chopt50wgn This is such a quality job... 05-30-2016, 02:48 AM

40FordDeluxe Nice work! I'm curious to see... 05-31-2016, 03:27 PM

MP&C Oh, that will be the easy... 05-31-2016, 10:47 PM

MP&C As we found with some of the... 06-02-2016, 06:58 PM

40FordDeluxe Robert, that is awesome! You... 06-03-2016, 11:52 AM

MP&C Can't learn watching. I'd... 06-03-2016, 01:14 PM

40FordDeluxe I'd have no problem with that... 06-03-2016, 04:25 PM

MP&C Next task on the list is to... 06-08-2016, 04:16 AM

stovens super work video was very... 06-08-2016, 09:23 AM

40FordDeluxe Awesome! Thanks for the vid.... 06-08-2016, 11:42 AM

MP&C That's 4X speed on Movie... 06-08-2016, 11:45 AM

MP&C A bit further along on the... 06-17-2016, 03:26 AM

34_40 Thanks for the pics and... 06-17-2016, 08:12 AM

40FordDeluxe At least there weren't any... 06-17-2016, 10:49 AM

MP&C Thanks! OK, it's been a... 06-18-2016, 09:10 PM

34_40 A scene from Rocky 47 I... 06-19-2016, 04:05 AM

40FordDeluxe I like how you even tell your... 06-20-2016, 06:20 PM

MP&C Thanks for the comments guys.... 06-25-2016, 09:05 PM

40FordDeluxe That looks awesome! I'm sure... 06-27-2016, 12:51 PM

MP&C Had to suck it in stepping... 06-27-2016, 01:01 PM

stovens Wow better than new off the... 06-27-2016, 02:17 PM

MP&C No, still have some metal... 06-28-2016, 08:33 PM

Navy7797 Every time I look at your... 06-30-2016, 06:31 PM

MP&C Thanks! Well Cody... 06-30-2016, 07:18 PM

stovens very cool detail thousand... 06-30-2016, 09:25 PM

34_40 UM... Now we need to see the... 07-01-2016, 10:18 AM

MP&C Not necessarily in... 07-01-2016, 01:33 PM

johnboy Crikey! That's impressive!... 07-01-2016, 02:26 PM

34_40 Times two! What he said.. ... 07-01-2016, 05:54 PM

40FordDeluxe Great work on the glove box... 07-05-2016, 11:23 AM

MP&C It sure is! Got a... 07-07-2016, 08:56 PM

MP&C Cody travelled down today... 07-16-2016, 06:38 PM

34_40 I will have to admit I,... 07-17-2016, 03:16 AM

40FordDeluxe That is really cool and... 07-18-2016, 02:55 PM

MP&C Thanks guys! Cody got one of... 07-18-2016, 05:23 PM

MP&C Well after block sanding the... 08-29-2016, 04:54 AM

randyr Perhaps you should have put... 08-29-2016, 07:00 AM

NTFDAY That's a great idea, but i... 08-29-2016, 08:40 AM

34_40 YES! I'll echo what R2 said..... 08-29-2016, 07:40 AM

randyr it looks like it might have... 08-29-2016, 07:46 AM

MP&C Thanks for the comments guys.... 09-10-2016, 06:27 PM

40FordDeluxe More awesome work. Your tools... 09-12-2016, 03:00 PM

MP&C Working today on fitting up... 09-17-2016, 07:59 PM

34_40 I know we always say thank... 09-18-2016, 02:47 AM

MP&C Thanks! Made our table... 09-20-2016, 08:32 PM

MP&C Last night we used the poster... 09-23-2016, 10:49 AM

34_40 I wish I could tig as fast as... 09-23-2016, 01:14 PM

MP&C Me too. He just runs circles... 09-23-2016, 02:51 PM

40FordDeluxe More great work you 2! 09-23-2016, 03:31 PM

MP&C Thanks Ryan! Here's a... 09-24-2016, 07:00 PM

40FordDeluxe More great work and attention... 09-26-2016, 02:05 PM

MP&C Haha, so true. Thanks Ryan.... 10-01-2016, 08:07 PM

Jack F Thanks Robert for the 1/4"... 10-02-2016, 08:46 AM

rspears I liked the flattened copper... 10-02-2016, 09:15 AM

MP&C Here's the flattened copper... 10-02-2016, 10:33 AM

34_40 There are a couple different... 10-04-2016, 03:14 AM

40FordDeluxe Nice tips and thanks for... 10-03-2016, 12:37 PM

johnboy Some years back, when I was... 10-03-2016, 08:07 PM

rspears Most of the copper tubing we... 10-04-2016, 07:12 AM

MP&C Thanks for posting the... 10-09-2016, 10:45 AM

stovens Nice machine. Liked the... 10-09-2016, 12:45 PM

Capecreations21 Those came out wicked for... 10-09-2016, 01:25 PM

RichB Love the work on the wheel... 10-09-2016, 01:48 PM

40FordDeluxe The wheel well looks great.... 10-10-2016, 01:22 PM

MP&C Thanks for the comments! ... 10-10-2016, 05:45 PM

RichB Ryan: I show that same... 10-10-2016, 06:41 PM

40FordDeluxe Thanks guys. I was thinking... 10-11-2016, 12:35 PM

MP&C Thanks! Was working on... 10-23-2016, 07:37 PM

34_40 Those quarters were probably... 10-24-2016, 09:45 AM

randyr [QUOTE=34_40;561447]Those... 10-24-2016, 11:05 AM

stovens Next time your out of power... 10-24-2016, 10:05 AM

34_40 If the "owner" is foolish... 10-24-2016, 02:55 PM

cffisher Little story. I was out in my... 10-25-2016, 11:39 AM

40FordDeluxe Wait, the owner won't drive... 10-25-2016, 12:55 PM

MP&C Thanks for the kind words... 10-25-2016, 08:15 PM

stovens beautiful color 10-25-2016, 10:33 PM

MP&C Thanks! Here's our paint... 10-27-2016, 04:49 AM

40FordDeluxe That is going to look awesome! 10-27-2016, 12:48 PM

Whiplash23T WOW. That is an absolutely... 10-27-2016, 02:15 PM

MP&C Sorry for the lack of posts... 11-11-2016, 08:43 PM

firebird77clone Have you ever heard the... 11-11-2016, 10:50 PM

RichB Wow, great stuff!! Hard to... 11-12-2016, 06:34 AM

stovens Love the videos too! You make... 11-12-2016, 10:02 AM

34_40 Now I feel... 11-12-2016, 02:47 PM

johnboy Funnily enough I can relate... 11-12-2016, 07:38 PM

MP&C Thanks guys! Rich, we had... 11-14-2016, 10:26 PM

40FordDeluxe A lot of very awesome work... 11-15-2016, 04:20 PM

firebird77clone I wanna come next year! Do... 11-15-2016, 10:08 PM

MP&C Hamilton VA? 11-16-2016, 12:43 PM

MP&C Today found us doing some... 11-20-2016, 06:49 PM

johnboy Crikey! To have the door of... 11-20-2016, 07:20 PM

34_40 I guess QA/QC was off that... 11-21-2016, 09:59 AM

40FordDeluxe A lot of things on those... 11-21-2016, 11:24 AM

cffisher Nice job BUT how did you... 11-21-2016, 11:38 AM

MP&C The area of the spot welds... 11-21-2016, 11:55 AM

MP&C Started the evening off with... 11-29-2016, 09:19 PM

MP&C Welded some more TIG coupons... 12-02-2016, 06:59 AM

MP&C With the rockers and inner... 12-06-2016, 07:59 PM

MP&C When we fabricated the... 12-10-2016, 09:54 PM

MP&C Well here's the saga of the... 12-20-2016, 06:32 AM

RichB Great work, and great pics! ... 12-20-2016, 06:54 AM

stovens Must be fun jacking a Bus up... 12-20-2016, 09:44 AM

MP&C Jack, block. Jack with... 12-20-2016, 10:07 AM

40FordDeluxe Very nice bus repair again.... 12-20-2016, 01:19 PM

MP&C Our local BOE has a... 12-21-2016, 10:48 AM

MP&C All plug welds completed and... 12-23-2016, 05:20 AM

MP&C Tonight we worked on getting... 12-27-2016, 08:19 PM

34_40 That piloted drill/brush is a... 12-28-2016, 05:07 AM

MP&C McMaster Carr, look here... 12-28-2016, 05:16 AM

NTFDAY Used something very similar... 12-28-2016, 05:52 AM

MP&C We started using them when... 01-03-2017, 04:17 AM

34_40 As I started to scroll... 01-03-2017, 05:24 AM

40FordDeluxe More very nice work. I really... 01-03-2017, 04:08 PM

MP&C Seat riser bracket number two... 01-04-2017, 07:15 PM

cffisher Like they say having the... 01-05-2017, 10:19 AM

40FordDeluxe Very nice work. I'll be... 01-05-2017, 11:21 AM

cffisher I've got a bead roller ,... 01-05-2017, 02:17 PM

MP&C OK, so sometimes you take... 01-07-2017, 07:18 PM

34_40 Good catch Robert. When... 01-08-2017, 02:47 AM

chopt50wgn It's always the littlest... 01-08-2017, 03:38 AM

53 Chevy5 Nice work, I wish I could do... 01-08-2017, 08:55 PM

MP&C More details on the seat... 01-11-2017, 06:40 AM

randyr Your attention to detail and... 01-11-2017, 06:46 AM

40FordDeluxe Very nice! Were the seat... 01-11-2017, 12:56 PM

MP&C The inside seat belt is... 01-11-2017, 05:44 PM

53 Chevy5 I'm not going to show... 01-17-2017, 05:58 PM

MP&C Haha! you should see the... 01-18-2017, 06:06 AM

MP&C Moving on to closing up the... 01-21-2017, 11:05 PM

40FordDeluxe Man, you do great work. I... 01-23-2017, 12:51 PM

MP&C Cody Walls took the Dave... 01-29-2017, 07:45 PM

34_40 Cody learned his craft very... 01-30-2017, 02:37 PM

stovens Proud for you guys! 01-30-2017, 03:23 PM

MP&C Yesterday I rode up to York... 06-05-2017, 09:25 AM

Whiplash23T Amazing car and... 01-30-2017, 07:36 PM

MP&C Thanks guys for all the kind... 01-30-2017, 09:08 PM

34_40 It's times like those when... 01-31-2017, 06:51 AM

MP&C Yeah, we also moved it... 02-01-2017, 03:49 AM

53 Chevy5 That stinks, more parts in... 02-01-2017, 06:26 AM

MP&C Final design on the bucket... 02-04-2017, 08:27 PM

stovens Beefy comfy seat there with a... 02-04-2017, 09:01 PM

MP&C The side airbags are coming... 02-04-2017, 09:08 PM

MP&C Always a new challenge every... 02-14-2017, 07:27 PM

40FordDeluxe Nice work on that seat base.... 02-14-2017, 07:46 PM

MP&C Don't think I showed this on... 02-15-2017, 08:01 PM

34_40 More great tips! 02-16-2017, 03:23 AM

40FordDeluxe Thanks for that! So simple... 02-16-2017, 12:20 PM

MP&C .......then the outer flange... 02-21-2017, 03:41 AM

53 Chevy5 You can't pull the wool over... 02-21-2017, 06:40 PM

MP&C :LOL: Dang, my secret's out! 02-21-2017, 06:47 PM

MP&C Got a new apprentice that... 02-22-2017, 08:13 PM

MP&C Sometimes you just need to... 02-25-2017, 02:11 PM

MP&C Getting down to the nitty... 03-02-2017, 03:52 AM

40FordDeluxe More great work and nice tube... 03-02-2017, 11:48 AM

MP&C She's 15 and has carried a... 03-02-2017, 12:09 PM

cffisher You could always use the... 03-02-2017, 02:47 PM

40FordDeluxe I don't blame her. Hate for... 03-02-2017, 05:57 PM

MP&C It does have a quick... 03-02-2017, 04:08 PM

34_40 I'm still trying to wrap my... 03-02-2017, 04:18 PM

MP&C Keeping options open... ... 03-06-2017, 04:30 AM

53 Chevy5 Looks like the young lady may... 03-02-2017, 07:46 PM

40FordDeluxe More nice work! Hopefully 39*... 03-06-2017, 11:51 AM

53 Chevy5 "When it's 39* outside and... 03-06-2017, 08:01 PM

firebird77clone Your shop can't exist in a... 03-07-2017, 01:35 AM

MP&C You get a slight odor, but... 03-07-2017, 03:24 AM

MP&C Got started on drilling plug... 03-07-2017, 07:48 PM

40FordDeluxe I really dig that. I need to... 03-07-2017, 08:13 PM

53 Chevy5 I love that pilot brush you... 03-08-2017, 07:48 PM

MP&C Tonight found us working on... 03-08-2017, 08:22 PM

53 Chevy5 You got that pounded out... 03-08-2017, 08:35 PM

34_40 Amazing that you can get the... 03-09-2017, 04:52 PM

40FordDeluxe I agree with what they said.... 03-09-2017, 05:58 PM

firebird77clone My limited experience would... 03-09-2017, 08:08 PM

MP&C Spent a few more hours... 03-11-2017, 07:01 PM

40FordDeluxe Very nice work on that! 03-13-2017, 11:38 AM

MP&C Thanks Ryan! Last night... 03-15-2017, 03:59 AM

53 Chevy5 Nice work, It looks like the... 03-15-2017, 07:34 PM

MP&C Haha! Winding down on the... 03-20-2017, 03:49 AM

40FordDeluxe More great work. I like the... 03-20-2017, 11:54 AM

MP&C The bus is old so the paint... 03-20-2017, 11:56 AM

40FordDeluxe It'll just get hit,... 03-20-2017, 12:44 PM

cffisher Only the school basketball... 03-20-2017, 04:45 PM

34_40 Good One Charlie! 03-20-2017, 04:55 PM

53 Chevy5 Looks good, I think that one... 03-20-2017, 06:54 PM

MP&C All done with the school bus!... 03-22-2017, 10:59 AM

stovens Excellent work 03-23-2017, 12:32 AM

53 Chevy5 Nice work! I have a curse of... 03-23-2017, 05:33 PM

MP&C That was the bus owner's... 03-24-2017, 08:02 PM

MP&C In removing the section of... 03-25-2017, 07:57 PM

randyr Nice work, as always, Robert!... 03-25-2017, 08:23 PM

MP&C Thanks Randy, we're going to... 03-25-2017, 08:33 PM

randyr I knew you had a good... 03-25-2017, 08:45 PM

MP&C Back in the shop this... 04-04-2017, 07:49 PM

40FordDeluxe More great work! Those... 04-05-2017, 12:57 PM

MP&C The vise was used in making... 04-09-2017, 07:42 PM

40FordDeluxe Very nice pics showing how to... 04-10-2017, 12:36 PM

randyr This whole thread is like a... 04-10-2017, 12:40 PM

53 Chevy5 Randyr nailed it, I'm always... 04-10-2017, 07:27 PM

34_40 Couldn't have said it any... 04-10-2017, 06:48 PM

40FordDeluxe Seth, :LOL:. 04-10-2017, 07:38 PM

MP&C After making the relief cuts,... 04-10-2017, 10:58 PM

Jack F It's amazing how the smallest... 04-11-2017, 07:57 AM

MP&C More work on the seat back... 04-15-2017, 09:45 PM

MP&C Had a short evening in the... 05-17-2017, 04:18 AM

MP&C Time for some brackets for... 05-18-2017, 08:18 PM

MP&C Had our new apprentice... 05-21-2017, 06:51 PM

40FordDeluxe More awesome work. I really... 05-22-2017, 12:11 PM

MP&C The hoop on the back adds... 05-22-2017, 12:17 PM

MP&C Had a late start in the shop... 05-23-2017, 07:26 PM

stovens Fun how stuff happens and the... 05-24-2017, 09:49 AM

40FordDeluxe Yeah, driver amnesia happens... 05-24-2017, 11:59 AM

53 Chevy5 I hate you as usual for... 05-24-2017, 08:45 PM

34_40 Let me guess. You guys... 05-25-2017, 06:54 PM

stovens LOL that's just what I was... 05-26-2017, 10:25 AM

MP&C Pilot hole drilled for the... 05-27-2017, 08:33 PM

MP&C Tonight we have both seat... 05-30-2017, 07:40 PM

MP&C To catch up on the wagon, the... 06-05-2017, 08:39 AM

stovens Fantastic as usual! 06-05-2017, 09:08 AM

40FordDeluxe Very nice work! Those side... 06-05-2017, 11:50 AM

RichB Amazing car, a real testament... 06-05-2017, 01:49 PM

MP&C Saturday Mike worked on the... 06-11-2017, 09:15 PM

MP&C With the Biederman fenders... 06-17-2017, 07:34 PM

40FordDeluxe I really like the laser for a... 06-19-2017, 03:48 PM

MP&C After three weeks of... 07-18-2017, 05:09 AM

Whiplash23T I know I'm not the brightest... 07-18-2017, 08:55 PM

MP&C A single subwoofer speaker is... 07-19-2017, 03:58 AM

rspears Just thinking, which can be... 07-19-2017, 06:00 AM

MP&C Good call. had planned on... 07-19-2017, 06:28 AM

53 Chevy5 Following this thread, I... 07-19-2017, 06:38 PM

MP&C Made a set of C-pillars for a... 07-21-2017, 07:37 AM

34_40 Are those little (small)... 07-21-2017, 11:37 AM

MP&C Diacro manual press brakes. ... 07-21-2017, 11:54 AM

34_40 "Diacro manual press brakes. ... 07-21-2017, 02:24 PM

randyr That's one way to get your... 07-23-2017, 09:36 AM

34_40 OH Randy.... ... 07-23-2017, 12:56 PM

MP&C Yesterdays progress.... ... 07-23-2017, 09:02 AM

Whiplash23T Robert, thank you in one way... 07-23-2017, 03:43 PM

MP&C Thanks for the comments guys.... 07-23-2017, 07:48 PM

40FordDeluxe More ingenious ideas and... 07-24-2017, 01:53 PM

53 Chevy5 I agree with Ryan, he hit the... 07-24-2017, 08:25 PM

MP&C Thanks for the comments guys!... 07-26-2017, 04:16 AM

40FordDeluxe I always wondered how none of... 07-26-2017, 10:56 AM

34_40 The first sentence began with... 07-26-2017, 03:11 PM

MP&C Urethane only has been the... 07-27-2017, 05:05 AM

34_40 Sorry if I'm becoming anxious... 07-27-2017, 01:00 PM

MP&C No problem... I'm ready for... 07-27-2017, 07:57 PM

MP&C More back seat work on the... 07-29-2017, 05:02 PM

MP&C More work on the seat back, a... 08-05-2017, 07:59 PM

stovens Wow you guys continue to... 08-05-2017, 10:32 PM

53 Chevy5 Looks like it's all coming... 08-06-2017, 03:26 PM

40FordDeluxe Very nice! I'm really... 08-07-2017, 02:19 PM

MP&C Thanks for the comments! ... 08-10-2017, 07:41 PM

40FordDeluxe That looks very nice. Do you... 08-10-2017, 09:30 PM

34_40 Your primer job is shinier... 08-11-2017, 05:14 PM

stovens Looking good 08-11-2017, 06:03 PM

MP&C Thanks for the comments guys!... 08-11-2017, 07:34 PM

MP&C Well last night found us... 08-16-2017, 11:53 AM

40FordDeluxe Nice work! Did you use a jig... 08-16-2017, 12:27 PM

MP&C I started with finding hole... 08-16-2017, 07:02 PM

40FordDeluxe I dig the cruise control!... 08-17-2017, 01:14 PM

34_40 cruise control.. roflma 08-17-2017, 05:45 PM

v8nutz In wood or aluminum I really... 08-17-2017, 06:18 PM

MP&C Just watch those fingers! ... 08-18-2017, 08:40 AM

MP&C Got the drivers corner for... 08-28-2017, 06:33 PM

MP&C Got a message Monday night... 08-30-2017, 07:35 AM

MP&C Still haven't set up the new... 09-04-2017, 09:34 AM

MP&C So yeah, yesterday was the... 09-06-2017, 05:23 PM

RooDog Did the driver of the blue... 10-10-2017, 07:51 AM

53 Chevy5 That stinks, It looks like... 09-06-2017, 06:20 PM

34_40 That wasn't the same bus too... 09-07-2017, 02:32 PM

MP&C No, different one, I haven't... 09-07-2017, 06:42 PM

MP&C New apprentice starting this... 09-11-2017, 08:48 AM

MP&C Another distraction! Never... 09-21-2017, 08:37 AM

34_40 At least this one has less...... 09-21-2017, 04:05 PM

40FordDeluxe Nice work. At least it came... 09-21-2017, 05:50 PM

stovens ditto what he said! 09-21-2017, 06:22 PM

53 Chevy5 You defiantly have a variety. 09-21-2017, 08:01 PM

34_40 Shall we all come over and...... 09-22-2017, 02:51 PM

MP&C It showed up without samples.... 09-25-2017, 05:04 AM

34_40 Didn't even leave you (us?)... 09-25-2017, 11:30 AM

40FordDeluxe What Mike said. They probably... 09-25-2017, 11:43 AM

MP&C RooDog, the way they tail... 11-01-2017, 12:08 AM

MP&C https://lh3.googleusercontent.... 11-01-2017, 12:10 AM

40FordDeluxe Very nice! The last 40 in... 11-01-2017, 11:43 AM

MP&C The green car has a V12... 11-01-2017, 01:09 PM

34_40 Thanks for the wonderful pics... 11-01-2017, 05:45 PM

MP&C Well I think I have google... 11-01-2017, 09:31 PM

MP&C Console fabrication ... 11-06-2017, 06:57 AM

MP&C Some sprayouts done this... 11-10-2017, 09:10 PM

stovens They all look good, daylight... 11-11-2017, 12:35 AM

MP&C Sunlight views in same order,... 11-12-2017, 07:45 PM

stovens Is the H/K at 9:00 in the... 11-13-2017, 10:24 AM

40FordDeluxe I think you are making a... 11-13-2017, 11:33 AM

MP&C Yes, and in the sunlight the... 11-13-2017, 12:07 PM

40FordDeluxe That's about the same style... 11-13-2017, 05:32 PM

53 Chevy5 I got a shade of green for ya... 11-13-2017, 08:26 PM

MP&C Like the color matching shirt... 11-14-2017, 04:03 AM

RichB Robert: Great stuff as... 11-14-2017, 07:54 AM

MP&C Rich, we're looking at a... 12-01-2017, 07:18 PM

34_40 One side of my family runs a... 11-14-2017, 08:49 AM

MP&C We took a short break from... 12-01-2017, 07:45 PM

MP&C Jake's project for the class... 12-01-2017, 07:48 PM

40FordDeluxe Man, that is so awesome! Very... 12-01-2017, 09:54 PM

MP&C We got the wagon parts pulled... 12-03-2017, 08:52 AM

MP&C Been in Florida the past... 12-10-2017, 08:09 PM

BAM55 This thread is just full of... 12-15-2017, 12:34 PM

MP&C Thanks Bam, you're no slouch... 12-17-2017, 08:36 PM

MP&C Progress last night on the... 12-22-2017, 05:55 AM

MP&C Merry Christmas and Happy... 12-23-2017, 06:54 PM

34_40 I find this work just... 12-24-2017, 03:37 AM

stovens Merry Christmas back at you... 12-24-2017, 09:33 AM

40FordDeluxe Very nice work! The console... 12-26-2017, 11:55 AM

MP&C Happy New Year to everybody!... 12-31-2017, 09:35 PM

MP&C More console progress today,... 01-06-2018, 07:46 PM

MP&C We were originally going to... 01-13-2018, 06:25 PM

34_40 As always, amazing and... 01-14-2018, 04:16 AM

40FordDeluxe Very nice work. I know you... 01-15-2018, 11:17 AM

34_40 Ryan, the original.. Home -... 01-15-2018, 06:05 PM

MP&C Ryan, these were Rotacut hole... 01-15-2018, 06:42 PM

53 Chevy5 Very nice as usual, thanks... 01-15-2018, 08:43 PM

MP&C Didn't get as many pictures... 01-28-2018, 09:13 PM

40FordDeluxe That looks great, and thanks... 01-29-2018, 02:17 PM

34_40 Boy this one has been a pile... 01-29-2018, 04:07 PM

MP&C Scary if it meets Kramer's... 02-21-2018, 07:00 AM

MP&C Jake's progress on the rear... 02-21-2018, 07:04 AM

stovens Excellent! 02-21-2018, 09:52 AM

40FordDeluxe So much awesomeness going on... 02-21-2018, 03:07 PM

34_40 Cosmo and I approve!... 02-21-2018, 03:33 PM

MP&C Thanks for the comments! ... 02-25-2018, 05:39 PM

MP&C More progress on the wagon,... 03-02-2018, 03:56 AM

40FordDeluxe That is looking great! This... 03-02-2018, 01:17 PM

MP&C Finishing up our floor... 03-17-2018, 08:48 PM

53 Chevy5 Awesome as always. I'm hoping... 03-18-2018, 05:17 PM

firebird77clone Cut the bottom off a yeti... 03-18-2018, 05:45 PM

johnboy Pardon my ignorance; but I'm... 03-18-2018, 09:18 PM

randyr it's something like this,... 03-18-2018, 11:47 PM

johnboy Thank you Mr Ross sir. You... 03-19-2018, 09:14 PM

Bob Parmenter I want to know what JB... 03-19-2018, 04:44 AM

rspears ......let's see, a "Yetty"... 03-19-2018, 05:00 AM

40FordDeluxe Nice work and I can relate to... 03-19-2018, 02:43 PM

MP&C I don't think I'd have room... 03-26-2018, 10:59 AM

40FordDeluxe That looks so nice! Will the... 03-26-2018, 12:05 PM

shine 7 days at 70 degrees 03-26-2018, 12:30 PM

MP&C Made a new tool Tuesday... 03-29-2018, 04:52 AM

MP&C I advised them of the 7 day... 03-29-2018, 04:51 AM

rspears That's a very cool,... 03-29-2018, 08:21 AM

40FordDeluxe Very nice and thanks for... 03-29-2018, 07:51 PM

MP&C We were blocking out the... 03-31-2018, 05:15 PM

53 Chevy5 That's pretty neat, there's... 03-31-2018, 07:51 PM

firebird77clone Scatter some iron filings on... 03-31-2018, 08:20 PM

MP&C Had a couple questions on... 04-01-2018, 06:37 PM

34_40 I had to read this a few... 04-02-2018, 05:37 PM

40FordDeluxe That is a very cool and time... 04-02-2018, 11:22 AM

MP&C Spent last week in Rock Hill... 04-11-2018, 06:12 PM

MP&C Our first task tonight was to... 04-11-2018, 06:22 PM

firebird77clone Have you ever considered... 04-11-2018, 08:24 PM

MP&C I do need more storage.... ... 04-11-2018, 08:35 PM

40FordDeluxe That is absolutely awesome!... 04-11-2018, 08:34 PM

v8nutz Very clever work, I admire... 04-11-2018, 08:34 PM

34_40 UM... Robert. WOW! Once... 04-12-2018, 05:03 PM

MP&C Well, we have the new engine... 06-20-2018, 08:10 PM

v8nutz Nice work as always. 06-20-2018, 08:19 PM

34_40 I agree, as always nice work... 06-21-2018, 07:12 AM

40FordDeluxe That looks so nice. The... 06-25-2018, 07:09 PM

MP&C Progress on the wagon... ... 07-22-2018, 08:23 PM

firebird77clone Seeing the car flipped: my... 07-23-2018, 06:48 AM

40FordDeluxe Very nice work on that fill... 07-23-2018, 12:16 PM

MP&C We found in painting the... 07-23-2018, 07:10 PM

MP&C We found a flat spot in the... 07-29-2018, 10:23 PM

cffisher What you don't have you have... 07-30-2018, 05:54 AM

stovens Your collection would be fun... 07-30-2018, 10:04 AM

40FordDeluxe Very nice! Do you mark or... 07-30-2018, 11:50 AM

MP&C I have a good collection of... 07-30-2018, 05:02 PM

MP&C Well, we've had about a month... 08-23-2018, 12:24 PM

MP&C Back to some wagon progress,... 08-23-2018, 12:26 PM

MP&C Yesterday we got some seam... 08-26-2018, 12:20 PM

stovens Forgive my ignorance, but why... 08-27-2018, 09:44 AM

MP&C There is a lapped joint... 08-27-2018, 10:07 AM

RichB first class work as usual! ... 08-27-2018, 12:04 PM

40FordDeluxe Looking so nice! 08-27-2018, 01:00 PM

34_40 Times 3.. as usual, ... 08-27-2018, 04:11 PM

MP&C So we had fabricated a... 09-10-2018, 09:04 PM

40FordDeluxe Yep, looks like the same... 09-11-2018, 02:04 PM

MP&C Been going through too many... 09-12-2018, 04:59 AM

stovens Robert I do the same with... 09-16-2018, 11:10 AM

MP&C So this weekend the core... 09-23-2018, 07:54 PM

53 Chevy5 Nice work. It's always a good... 09-23-2018, 08:05 PM

Bob Parmenter The bit of extra effort to... 09-24-2018, 04:04 AM

Driver50x That's a good tip on using... 09-24-2018, 06:07 AM

shine i use the flex hot air hose... 09-24-2018, 06:29 AM

MP&C Well the past few scheduled... 10-05-2018, 07:34 PM

randyr that hinge choice is really... 10-05-2018, 07:46 PM

Driver50x How big is that hinge? Do you... 10-06-2018, 09:19 AM

MP&C It's labeled as a 1.25 x... 10-06-2018, 05:32 PM

stovens Nice choices, I like your... 10-06-2018, 09:51 AM

40FordDeluxe That hinge looks like it was... 10-09-2018, 06:36 PM

MP&C More progress on our console,... 10-09-2018, 07:52 PM

MP&C More progress on the console,... 10-11-2018, 08:11 PM

40FordDeluxe Very nice! Where do I place... 10-12-2018, 01:35 PM

stovens Once again excellent metal... 10-13-2018, 09:26 AM

MP&C My wife's cousin JB, who... 10-17-2018, 04:28 AM

40FordDeluxe That is very nice! Great use... 10-18-2018, 12:01 PM

MP&C Some days I can't leave well... 10-19-2018, 04:15 AM

cffisher "Quality" and you know... 10-19-2018, 05:50 AM

MP&C Saturday morning Mike and I... 10-24-2018, 06:10 AM

40FordDeluxe Great idea on those pieces.... 10-24-2018, 11:12 AM

MP&C Share my installation video... 10-24-2018, 11:14 AM

40FordDeluxe I have used a bolt and nut in... 10-24-2018, 11:46 AM

MP&C Tool part numbers in the... 10-24-2018, 12:05 PM

MP&C E worked Thurday evening on... 10-27-2018, 08:22 PM

40FordDeluxe Nice work. That looks like... 10-29-2018, 12:14 PM

MP&C We tossed around quite a few... 10-29-2018, 07:04 PM

40FordDeluxe Those gates heat shrink ones... 10-29-2018, 07:37 PM

34_40 I had the exact same... 10-30-2018, 05:33 AM

MP&C Another part we're adding due... 11-04-2018, 08:32 AM

MP&C I have a couple radius bends... 11-15-2018, 06:33 PM

MP&C https://www.youtube.com/watch?... 11-16-2018, 08:09 AM

40FordDeluxe Great work! That is one of... 11-16-2018, 05:27 PM

MP&C I did have quite a bit of... 11-16-2018, 05:56 PM

MP&C Happy Thanksgiving everyone!... 11-22-2018, 08:33 AM

40FordDeluxe Very nice work and thanks for... 11-23-2018, 12:52 PM

MP&C Ryan, I think we will be... 11-26-2018, 06:46 AM

40FordDeluxe Nice work on that dolly! I'm... 11-26-2018, 11:55 AM

MP&C Our 18 Gauge upper radiator... 11-27-2018, 08:36 PM

MP&C Well as normal, one change... 12-02-2018, 09:02 AM

MP&C I took delivery the other day... 12-07-2018, 10:35 PM

stovens You guys are amazing! 12-08-2018, 12:43 AM

34_40 yeah, what he said. Amazing!... 12-08-2018, 03:54 AM

MP&C https://www.youtube.com/watch?... 12-10-2018, 07:09 AM

MP&C More progress on the wagon,... 12-15-2018, 09:39 PM

34_40 A second lamp? Why of course!... 12-16-2018, 06:48 AM

MP&C It does to me! :LOL: 12-16-2018, 08:05 AM

40FordDeluxe Man, you do great work. I can... 12-17-2018, 12:31 PM

MP&C Better to hit it more than... 12-17-2018, 02:13 PM

MP&C Today we were working on more... 12-21-2018, 08:37 PM

stovens Wow! for a minute there I... 12-22-2018, 12:21 AM

40FordDeluxe Nice work on those. You... 12-26-2018, 03:13 PM

MP&C Got a new addition to the... 12-27-2018, 04:15 AM

cffisher really impressed that t did... 12-27-2018, 09:54 AM

40FordDeluxe Very nice! I used to do a lot... 12-27-2018, 12:54 PM

firebird77clone I don't see much warpage, ... 12-27-2018, 05:07 PM

MP&C Where the gas torch really... 12-27-2018, 07:31 PM

MP&C Best wishes to everyone for a... 01-02-2019, 04:35 AM

40FordDeluxe The magnet pockets turned out... 01-02-2019, 06:01 PM

MP&C Thanks Ryan! We got the... 01-03-2019, 08:09 PM

v8nutz Very nice, incredible detail. 01-04-2019, 10:52 AM

BAM55 You are a metal artist 01-04-2019, 01:45 PM

34_40 I'll have to admit, I... 01-04-2019, 03:17 PM

MP&C Thanks for checking out the... 01-08-2019, 09:34 AM

40FordDeluxe So very nice! 01-08-2019, 12:56 PM

34_40 more amazing work and results. 01-08-2019, 03:55 PM

v8nutz Really great metal work. No... 01-09-2019, 07:57 AM

RichB I like how you use the lathe... 01-09-2019, 08:58 AM

MP&C To help out with "learning... 01-09-2019, 09:27 AM

MP&C Picked up the console from... 01-10-2019, 07:50 PM

stovens Very nice. Your finishing... 01-11-2019, 11:34 AM

MP&C Thanks! More progress,... 01-14-2019, 09:58 AM

MP&C Last night I tried to tackle... 01-16-2019, 07:21 AM

stovens Very cool. I'd say your... 01-16-2019, 10:05 AM

cffisher Just wondering would it be... 01-16-2019, 01:54 PM

MP&C I didn't show the planishing... 01-17-2019, 04:31 AM

MP&C Did some mockup of the fuel... 01-19-2019, 09:10 PM

MP&C Some progress, doesn't look... 01-26-2019, 08:02 PM

randyr Robert, that rainbow was... 01-26-2019, 09:31 PM

stovens Must be good fish tacos they... 01-27-2019, 11:09 AM

RichB I would expect your HAZ to be... 01-27-2019, 01:55 PM

53 Chevy5 The detail being put into... 01-27-2019, 04:04 PM

40FordDeluxe The only rainbows we'll be... 01-28-2019, 03:33 PM

MP&C Thanks for the comments guys!... 02-03-2019, 02:34 PM

40FordDeluxe Very nice! What is the piece... 02-04-2019, 01:14 PM

MP&C I used round male to female... 02-04-2019, 01:36 PM

MP&C Saturday we got the tank... 02-10-2019, 09:14 PM

stovens Awesome ! Love the adapt and... 02-11-2019, 09:52 AM

40FordDeluxe Aww man, that is just too... 02-11-2019, 12:03 PM

MP&C Yes, stainless worm gear... 02-11-2019, 12:21 PM

MP&C Took delivery yesterday of... 02-13-2019, 05:43 AM

cffisher craftsmanship all the way 02-13-2019, 06:47 AM

40FordDeluxe I kind of like the 45* but... 02-13-2019, 01:46 PM

MP&C McMaster Carr, we are going... 02-13-2019, 02:18 PM

jerry clayton I like the mesh tables in MC... 02-13-2019, 04:47 PM

MP&C Ryan, we used three different... 02-13-2019, 04:59 PM

firebird77clone I'd never have thought to use... 02-13-2019, 07:54 PM

cffisher Been using McMaster Carr for... 02-14-2019, 05:30 AM

34_40 And usually very speedy with... 02-14-2019, 05:35 PM

40FordDeluxe Thanks Robert. I've been... 02-14-2019, 11:42 AM

Scrubline Impressive work, MP&C. Your... 02-14-2019, 07:02 PM

MP&C Thanks to all for their input... 02-16-2019, 06:43 PM

firebird77clone You're showing off. Don't... 02-16-2019, 07:01 PM

40FordDeluxe More great work. So you're... 02-18-2019, 11:39 AM

MP&C Yes, the samples of each were... 02-19-2019, 04:21 AM

MP&C Had a slight distraction... 02-19-2019, 07:32 AM

40FordDeluxe Very nice and fast work! Were... 02-19-2019, 02:21 PM

MP&C One was surprisingly straight... 02-19-2019, 08:33 PM

34_40 Yep, amazing piece of work. ... 02-19-2019, 03:56 PM

MP&C Well the owner sent me a... 02-21-2019, 09:01 AM

firebird77clone My hat's off to ya. ... 02-25-2019, 05:04 PM

MP&C More progress on the fuel... 02-23-2019, 09:41 PM

MP&C Hood side number two... 02-25-2019, 05:42 AM

MP&C That may be a bit of a... 02-27-2019, 03:51 AM

jerry clayton Nice work-But, I have to... 02-27-2019, 07:41 AM

johnboy A very salient point. I doubt... 02-27-2019, 07:59 PM

MP&C Jerry, thanks for the tips. ... 03-02-2019, 08:51 PM

MP&C Well after about 12 years,... 03-07-2019, 11:30 AM

johnboy On one trip to the US of A we... 03-07-2019, 12:54 PM

firebird77clone Curvature of the Earth! ... 03-07-2019, 08:13 PM

MP&C Hello, my name is Robert and... 03-08-2019, 03:48 AM

cffisher HA HA HA your not the only... 03-08-2019, 10:24 AM

34_40 Hello. My name is Michael..... 03-08-2019, 01:25 PM

MP&C Good thing I got a tilt bed... 03-10-2019, 02:21 PM

34_40 But, but, but..... where's... 03-10-2019, 04:43 PM

MP&C Haven't got it set up yet,... 03-11-2019, 07:56 PM

34_40 Thanks for the pics! I could... 03-12-2019, 03:50 PM

MP&C Finished up the fuel lines at... 03-17-2019, 09:09 PM

40FordDeluxe That safety sticker is... 03-28-2019, 03:11 PM

MP&C Well our progress on the... 03-31-2019, 07:01 PM

randyr So where are the louvers... 03-31-2019, 09:05 PM

MP&C Got a booth at a local car... 04-01-2019, 04:35 AM

randyr Ok, cool. I thought maybe you... 04-01-2019, 07:01 AM

stovens Very nice job on the louvers.... 04-01-2019, 10:09 AM

40FordDeluxe Cough, cough...... If you... 04-01-2019, 12:18 PM

RichB Love to see a video on those... 04-02-2019, 06:36 AM

MP&C Busy weekend! Saturday we... 04-09-2019, 09:24 AM

MP&C We need to do another spray... 04-12-2019, 09:27 AM

MP&C Mike did some component... 04-13-2019, 04:27 PM

40FordDeluxe Do you have room to to raise... 04-17-2019, 02:15 PM

MP&C Trying to hide the FI as much... 04-22-2019, 06:17 PM

MP&C Since we got our freshly... 04-23-2019, 07:44 PM

v8nutz Very pretty. 04-24-2019, 09:10 AM

34_40 So cool!!!! 04-24-2019, 10:17 AM

MP&C Thanks for the comments... 04-24-2019, 10:43 AM

stovens WoW! that's gonna be one of... 04-24-2019, 04:31 PM

johnboy What he said. I totally... 04-24-2019, 09:33 PM

40FordDeluxe Man that turned out really... 04-25-2019, 04:35 PM

RichB Absolutely stunning work!... 04-26-2019, 12:14 PM

MP&C Thanks for all the comments... 04-30-2019, 07:27 AM

stovens wow! Much better. I would of... 04-30-2019, 09:45 AM

40FordDeluxe Holy wow! That is the most... 04-30-2019, 01:18 PM

34_40 Quote, "Ryan, you can never... 04-30-2019, 05:29 PM

stovens Missed the link to the 6cyl... 05-01-2019, 09:18 AM

MP&C So last weekend I went to Ron... 05-11-2019, 09:56 PM

34_40 Wow that came out nice. ... 05-12-2019, 03:43 AM

MP&C I was wondering who would... 05-12-2019, 08:05 AM

34_40 Gonna sell any? I'd like one. 05-12-2019, 11:58 AM

MP&C The owner had a few printed... 05-12-2019, 01:01 PM

stovens Went back and looked didn't... 05-12-2019, 02:14 PM

34_40 3rd photo from the top.. 05-12-2019, 04:08 PM

firebird77clone Milage must vary. My third... 05-12-2019, 07:00 PM

johnboy Yep. And there's a young... 05-12-2019, 09:58 PM

34_40 it's even titled with an 03..... 05-13-2019, 06:02 PM

rspears Cropped for focus..... 71309 05-14-2019, 07:19 AM

40FordDeluxe Very nice work on that! It... 05-15-2019, 02:20 PM

MP&C Thanks for all the comments... 05-17-2019, 10:09 AM

34_40 I've said it so many times in... 05-17-2019, 10:34 AM

40FordDeluxe Great work! That is really... 05-20-2019, 02:43 PM

rspears Did the photo's in #1367 and... 05-20-2019, 05:03 PM

34_40 Pics are all still there for... 05-20-2019, 05:19 PM

MP&C Roger, did pictures ever show... 05-28-2019, 10:42 AM

rspears Robert, I checked and... 05-28-2019, 04:13 PM

34_40 I didn't realize your CAD... 05-28-2019, 03:18 PM

40FordDeluxe That's a good one. I've used... 05-29-2019, 08:29 PM

johnboy Haven't we all? :LOL: :LOL: 05-29-2019, 09:43 PM

34_40 And it isn't a new technique,... 05-30-2019, 04:52 PM

MP&C We had issue fitting the... 06-07-2019, 07:46 PM

MP&C Had some questions about how... 06-13-2019, 09:08 AM

MP&C Mike is still plugging away... 06-17-2019, 06:34 AM

MP&C Back on our speaker mounting... 06-18-2019, 07:38 PM

firebird77clone Mighty brave, welding an 8-32... 06-19-2019, 08:49 AM

MP&C .040 tungsten, rare earth... 06-19-2019, 09:15 AM

40FordDeluxe More very nice work! Those... 06-19-2019, 04:40 PM

MP&C Passenger door modifications,... 07-01-2019, 07:16 PM

MP&C Time to play catch-up, had a... 07-19-2019, 10:56 AM

MP&C Spent some time organizing,... 07-21-2019, 07:58 PM

hammer-time Very nice. 07-22-2019, 06:23 AM

cffisher Organizing is a good thing... 07-22-2019, 05:19 AM

40FordDeluxe Geeze! Your tool holders are... 07-26-2019, 07:28 PM

MP&C So while I'm blocking primer... 07-28-2019, 08:22 PM

johnboy Crikey! You must have a die... 07-28-2019, 10:15 PM

cffisher Electric tape is easier to... 07-29-2019, 04:41 AM

rspears E is quite a young lady! None... 07-29-2019, 04:55 AM

RichB I hope when this project is... 07-29-2019, 07:16 AM

firebird77clone How do I double - like this? ... 07-31-2019, 04:42 PM

MP&C Thanks guys!! Next job for... 07-30-2019, 08:04 PM

40FordDeluxe Is the Noico the same stuff... 07-31-2019, 11:51 AM

MP&C That’s where the owner bought... 07-31-2019, 03:59 PM

firebird77clone BTW... hard copy, coffee... 07-31-2019, 05:46 PM

MP&C Progress pics from last... 09-04-2019, 09:35 AM

40FordDeluxe More excellent work! Have you... 09-04-2019, 06:16 PM

MP&C Any heat noticed in normal... 09-04-2019, 09:28 PM

34_40 As usual - a great and... 09-05-2019, 03:00 AM

shine i use cardboard inside doors... 09-05-2019, 06:51 AM

53 Chevy5 Thanks again Mike. The... 09-05-2019, 07:06 AM

NTFDAY More than likely that someone... 09-05-2019, 07:22 AM

34_40 I've been known to toss a... 09-05-2019, 06:03 PM

40FordDeluxe Ok on the pressure washer... 09-06-2019, 06:11 PM

53 Chevy5 Noooooooo! I want to see the... 09-06-2019, 08:27 PM

34_40 Yeah, What he... 09-07-2019, 04:39 AM

MP&C I use a garnet abrasive that... 09-06-2019, 09:38 PM

53 Chevy5 I used black diamond media... 09-07-2019, 05:38 PM

34_40 I usually use Black Beauty on... 09-08-2019, 03:36 AM

40FordDeluxe What 40? I sold it. 09-08-2019, 07:26 AM

34_40 You BAHSTAHD!... 09-08-2019, 08:41 AM

53 Chevy5 You know where liars go don't... 09-08-2019, 11:57 AM

34_40 He'll have to start a thread... 09-08-2019, 01:13 PM

MP&C So we've been blocking out... 09-08-2019, 08:47 PM

rspears Good catch on the little rust... 09-09-2019, 05:28 AM

Driver50x I love how you guys can just... 09-09-2019, 09:16 AM

40FordDeluxe Nice find. You use a lot of... 09-09-2019, 12:49 PM

40FordDeluxe What I really like is you... 09-09-2019, 06:45 PM

MP&C :D It's a sickness I tell... 09-09-2019, 08:33 PM

cffisher If your going to do it why... 09-10-2019, 08:19 AM

53 Chevy5 Sometimes it's crazy how much... 09-10-2019, 08:39 AM

40FordDeluxe Very nice work! Is that just... 09-10-2019, 01:23 PM

MP&C Ryan, that was House of Kolor... 09-17-2019, 08:53 PM

MP&C Now to get our outer patch... 09-20-2019, 08:09 PM

firebird77clone I hadn't seen that particular... 09-21-2019, 06:16 PM

johnboy Neither have I! That's just... 09-21-2019, 09:55 PM

v8nutz I could have used that trick... 09-22-2019, 08:13 AM

40FordDeluxe That is slick! 09-24-2019, 07:18 PM

MP&C Here's some of the forming... 09-25-2019, 04:25 AM

40FordDeluxe Very nice work! You sure make... 09-25-2019, 02:35 PM

MP&C Flattening and backfacing a... 09-28-2019, 02:27 PM

MP&C Today we worked on some rust... 09-28-2019, 09:12 PM

40FordDeluxe I'd say you're going to have... 09-30-2019, 10:21 AM

MP&C Progress this weekend, We had... 10-06-2019, 07:11 PM

randyr 37 Chevy Fender...repair find... 11-23-2019, 11:46 AM

MP&C The fender looks to have a... 11-23-2019, 06:29 PM

randyr Hey Robert, thanks so much... 11-24-2019, 07:32 AM

MP&C Believe me, he has had the... 11-24-2019, 09:47 AM

randyr Stuck in the... 11-24-2019, 12:36 PM

firebird77clone I say beat on it. You can't... 11-24-2019, 12:55 PM

MP&C Had some visitors at the shop... 11-24-2019, 06:38 PM

MP&C Today Mike sent time blocking... 11-24-2019, 07:49 PM

MP&C Sign progress, Fine tuning of... 12-07-2019, 09:51 PM

MP&C A couple coats of Epoxy last... 12-07-2019, 10:07 PM

MP&C The sign was partially... 12-08-2019, 07:32 PM

34_40 Not that it matters in the... 12-09-2019, 04:24 PM

MP&C Well the Logo has just been... 12-12-2019, 09:29 AM

MP&C Time for a long overdue... 03-01-2020, 06:08 PM

randyr That's exciting, Robert! What... 03-01-2020, 08:11 PM

MP&C Thanks, Organic green Kandy... 03-01-2020, 08:49 PM

36 sedan Beautiful color! It'll look... 03-02-2020, 05:53 AM

stovens this project must be adding... 03-02-2020, 10:13 AM

firebird77clone He could paint it with mud... 03-02-2020, 01:24 PM

Navy7797 Looking gooood !! 03-05-2020, 06:17 PM

MP&C Thanks for all the kind words... 03-11-2020, 04:49 AM

40FordDeluxe The drum sign turned out... 03-16-2020, 04:40 PM

MP&C Thanks Ryan! Not many... 03-22-2020, 09:18 AM

34_40 The "real" final? As in... 03-22-2020, 09:36 AM

MP&C Say it isn't so... :LOL: 03-22-2020, 09:47 AM

34_40 Took the words right outta my... 03-22-2020, 01:29 PM

MP&C Vince has been getting all... 03-25-2020, 08:02 AM

MP&C Today Vince was doing more... 03-28-2020, 04:17 PM

MP&C We got some more epoxy... 04-05-2020, 12:17 PM

40FordDeluxe Maybe I should just paint my... 04-05-2020, 10:11 PM

Navy7797 thanks for sharing that tool... 04-06-2020, 05:50 PM

MP&C Thanks guys! Today I was... 04-11-2020, 04:09 PM

34_40 For a split second there, I... 04-12-2020, 02:51 PM

v8nutz Looks good! 04-12-2020, 07:06 AM

rspears How cool is that! Great color! 04-12-2020, 02:49 PM

40FordDeluxe Very nice!! 04-14-2020, 06:58 PM

MP&C Some spring cleaning.... ... 04-17-2020, 05:42 PM

MP&C We're in the middle of... 04-18-2020, 06:28 PM

MP&C With our adel clamps arrived,... 04-26-2020, 11:40 AM

40FordDeluxe That looks very nice! 04-27-2020, 06:12 PM

MP&C Had a visitor in the shop... 04-29-2020, 08:41 AM

Bob Parmenter Those louvers are fantastic. ... 04-30-2020, 04:55 AM

MP&C Bob, Cody says this one is... 04-30-2020, 06:01 AM

MP&C So yeah, we work on just... 05-04-2020, 09:19 AM

johnboy Words fail me. That is... 05-04-2020, 09:03 PM

MP&C Thanks John! Cody set... 05-14-2020, 04:46 AM

cffisher hard to say anything more... 05-14-2020, 05:08 AM

34_40 Exactly what Charlie said. ... 05-15-2020, 08:04 AM

Bob Parmenter What Charlie said! ... 05-14-2020, 05:25 AM

MP&C Thanks guys! Cody has an... 05-14-2020, 05:40 AM

johnboy I'm familiar with Austin... 05-14-2020, 09:47 PM

rspears I got out of school in '76... 05-15-2020, 03:47 PM

36 sedan I'll second that!! 05-15-2020, 04:10 PM

MP&C Thanks for the comments guys!... 05-27-2020, 05:45 AM

MP&C More progress in the shop,... 06-03-2020, 04:19 AM

stovens very nice interior 06-04-2020, 09:15 AM

MP&C Overdue for another update...... 06-29-2020, 04:38 AM

NTFDAY I'd say you're ready to... 06-29-2020, 05:48 AM

MP&C Some equipment changes in the... 07-01-2020, 05:51 AM

cffisher Nothing like having the right... 07-01-2020, 06:04 AM

rspears That's one BIG hammer! I like... 07-01-2020, 07:25 AM

johnboy What Charlie said; having the... 07-01-2020, 10:00 PM

MP&C Oh yeah, wagon got some paint... 08-11-2020, 09:27 PM

36 sedan That is AWESOME!! 08-12-2020, 05:56 AM

MP&C This morning, out of the... 08-12-2020, 06:52 AM

v8nutz Wow, nice application, super... 08-12-2020, 08:18 AM

40FordDeluxe That looks laser straight and... 08-12-2020, 11:13 AM

40FordDeluxe I had to go back and look at... 08-12-2020, 11:53 AM

rspears How about The Riddler 2021?? 08-12-2020, 02:37 PM

MP&C Still needs cut and buff,... 08-12-2020, 04:42 PM

johnboy Nice? Nice? Nice? ... 08-12-2020, 09:56 PM

40FordDeluxe Not good enough???? I'd let... 08-12-2020, 08:49 PM

MP&C Add some sunlight.... ... 08-19-2020, 09:09 AM

36 sedan Absolutely stunning!!! I may... 08-19-2020, 09:54 AM

johnboy Words fail me. I don't have... 08-19-2020, 09:38 PM

rspears Great colors, amazing finish!... 08-20-2020, 07:47 AM

MP&C Thanks for the comments guys!... 08-27-2020, 10:07 AM

53 Chevy5 It looks unbelievable! I'd... 08-27-2020, 04:36 PM

40FordDeluxe I bet you did have a lot of... 08-27-2020, 05:56 PM

MP&C Thanks for all the feedback... 08-30-2020, 09:41 PM

cffisher Progress WOW 10 characters or... 08-31-2020, 08:13 AM

MP&C Some basic metalshaping…. ... 10-04-2020, 08:54 PM

rspears Thanks for taking time to... 10-05-2020, 06:18 AM

cffisher Thanks for the demo.. I think... 10-05-2020, 07:16 AM

MP&C Part of the ring is a loose... 10-05-2020, 07:45 AM

MP&C I had a question on another... 10-05-2020, 09:14 AM

53 Chevy5 Awesome, his usual, you make... 10-05-2020, 10:19 AM

MP&C Well I think we're long... 10-07-2020, 06:01 AM

hammer-time Your tubing straightener... 10-08-2020, 07:23 AM

hammer-time Opps. I didn't mean to copy... 10-08-2020, 07:25 AM

cffisher Love it when things come... 10-07-2020, 10:11 AM

MP&C 3" x 3/8 plastic pulleys in... 10-08-2020, 07:32 AM

hammer-time Thanks for the link to the... 10-08-2020, 12:01 PM

MP&C Last night we got some... 10-09-2020, 05:25 AM

Bob Parmenter Always enjoy your tutorials... 10-10-2020, 05:26 AM

MP&C Thanks Bob! Well today... 10-10-2020, 08:42 PM

34_40 The last time? Not sure what... 10-11-2020, 03:15 AM

MP&C We have a 1954 Divco next, we... 10-11-2020, 10:16 AM

34_40 OUCH! Do you know what... 10-11-2020, 01:07 PM

MP&C Yes, Detroit Industrial... 10-11-2020, 02:19 PM

34_40 I think I remember your trip... 10-11-2020, 03:26 PM

MP&C Yes indeed.. So this... 10-19-2020, 06:13 AM

MP&C With the brake pedal sporting... 10-26-2020, 04:28 AM

MP&C Starting some of our... 11-06-2020, 05:52 AM

HOSS429 iv`e delt with antiseize... 11-08-2020, 07:56 AM

v8nutz Nicely done. Very clean... 11-06-2020, 06:00 AM

MP&C Thanks!! Oh yeah! Made... 11-06-2020, 10:28 AM

rspears Bet that got some looks... 11-06-2020, 03:23 PM

40FordDeluxe Very nice work on it all! It... 11-06-2020, 10:03 PM

MP&C Back when we were shaving all... 11-08-2020, 09:27 PM

stovens looks nice and clean 11-09-2020, 10:40 AM

40FordDeluxe Very nice! Do you get the... 11-10-2020, 02:51 PM

MP&C Thanks guys! Ryan, they... 11-10-2020, 03:33 PM

MP&C A while back I picked up some... 11-12-2020, 06:35 AM

MP&C Some weekend progress... ... 11-15-2020, 09:38 PM

v8nutz That is going to one nice car. 11-16-2020, 08:02 AM

40FordDeluxe It is looking so nice! That... 11-16-2020, 08:03 PM

MP&C So a few months back when we... 11-22-2020, 08:29 PM

Bob Parmenter And the world keeps turning. ... 11-23-2020, 04:58 AM

MP&C More progress on the wagon,... 12-03-2020, 09:14 AM

MP&C Well the new press brake is... 12-20-2020, 07:57 AM

Bob Parmenter A little side note for you... 12-21-2020, 05:04 AM

MP&C Lowered price, shipping... 12-29-2020, 08:29 PM

MP&C Second machine, lowered... 12-29-2020, 08:45 PM

BBB After about 1 1/2 hrs this... 01-04-2021, 09:06 AM

MP&C Not a problem, glad to help... 01-06-2021, 05:33 AM

MP&C Wagon update, we stopped by... 01-17-2021, 09:20 PM

v8nutz Looking good! 01-18-2021, 07:00 AM

NTFDAY That's just slicker than... 01-18-2021, 07:37 AM

MP&C Busy weekend, Norris... 01-25-2021, 09:52 AM

rspears But for the horrendous rust... 01-25-2021, 10:15 AM

40FordDeluxe Poor old 32! Someone should... 01-26-2021, 05:40 AM

MP&C It likely is the last one... 01-26-2021, 06:20 AM

MP&C Time for a wagon update, all... 02-08-2021, 09:06 PM

hammer-time Please tell us about the... 02-09-2021, 07:46 AM

MP&C The "rods" that pass through... 02-10-2021, 05:55 AM

rspears That's a very cool dent/ding... 02-10-2021, 06:31 AM

40FordDeluxe More awesome work! The... 02-09-2021, 09:05 AM

NTFDAY IIRC, in the 60's one of the... 02-10-2021, 08:24 AM

hammer-time Your stainless trim looks... 02-10-2021, 10:34 AM

MP&C Forgot I had done a video on... 02-11-2021, 02:17 PM

MP&C Back to our door panel... 02-15-2021, 10:44 PM

glennsexton What a masterpiece, Robert! ... 02-16-2021, 10:01 AM

MP&C Glenn, thanks for the kind... 02-17-2021, 10:19 PM

MP&C So we had some tilt in... 03-03-2021, 07:00 AM

MP&C In another back up and punt... 03-09-2021, 04:40 AM

MP&C So part of our fitment... 03-19-2021, 10:40 AM

34_40 As I'm flipping through your... 03-20-2021, 03:23 AM

MP&C Not my favorite back up and... 03-23-2021, 10:22 AM

53 Chevy5 Could you Jimmy rig one thing... 03-23-2021, 08:38 PM

v8nutz Good grief! The attention to... 03-24-2021, 07:16 AM

MP&C Thanks gents!!! ... 03-28-2021, 08:47 PM

stovens Very cool polishing and... 03-29-2021, 10:18 AM

34_40 Robert.. as always. WOW, just... 03-29-2021, 11:58 AM

MP&C Thanks guys. When we started... 03-30-2021, 08:41 PM

MP&C Happy Easter everyone! ... 04-04-2021, 08:43 PM

stovens Wow the details you... 04-05-2021, 11:04 AM

40FordDeluxe Very nice work! The... 04-15-2021, 04:15 AM

MP&C The following weekend we... 05-05-2021, 08:45 AM

MP&C So now that I'm back from the... 05-05-2021, 08:38 AM

stovens Love the diverse dislay of... 05-05-2021, 08:56 AM

53 Chevy5 That is fantastic! I got to... 05-05-2021, 05:28 PM

40FordDeluxe Very nice trip there! That... 05-06-2021, 06:29 AM

MP&C https://hosting.photobucket.co... 05-06-2021, 09:21 AM

34_40 Thanks for all the pics! Way... 05-06-2021, 08:58 AM

MP&C This past Saturday I went to... 05-13-2021, 05:29 AM

rspears A very nice show with a top... 05-13-2021, 07:46 AM

Bob Parmenter That black '36 roadster has a... 05-14-2021, 04:53 AM

MP&C Belongs to Mabe Pouncy,... 05-14-2021, 05:44 AM

Bob Parmenter Robert, I was thinking of... 05-14-2021, 09:00 AM

Jack F I could be wrong Bob but... 05-14-2021, 09:24 AM

Bob Parmenter Good to see ya Jack. Yes,... 05-15-2021, 04:51 AM

MP&C Well after about two months... 06-22-2021, 07:50 AM

MP&C The next couple of posts will... 07-07-2021, 01:05 PM

v8nutz That sucks. Man that is so... 07-07-2021, 01:18 PM

MP&C So now for some hindsight. ... 07-07-2021, 02:31 PM

ScooterCO Congratulations! A start up... 07-08-2021, 09:22 AM

falconvan Incredible job; that’s some... 07-10-2021, 03:06 PM

MP&C More progress on the (second)... 07-11-2021, 11:28 PM

MP&C More progress... using our... 07-19-2021, 05:57 AM

MP&C More progress on the fan... 07-22-2021, 05:24 AM

MP&C Looking at the fan shroud,... 08-08-2021, 12:07 AM

34_40 Another amazing piece Robert!... 08-08-2021, 05:36 AM

v8nutz I wish I had you guys... 08-08-2021, 08:36 AM

stovens Everything you do is just... 08-08-2021, 09:45 AM

johnboy That would be much... 08-08-2021, 09:21 PM

36 sedan All I can say is WOW!!!... 08-09-2021, 06:39 AM

Navy7797 you are a metal Master ! 08-28-2021, 09:16 AM

MP&C Thanks for the comments... 10-31-2021, 07:01 PM

stovens awesome as always 11-01-2021, 11:39 AM

MP&C Thanks! A side distraction,... 11-02-2021, 07:34 AM

MP&C The part was sent to the... 11-02-2021, 07:43 AM

hammer-time Most excellent work! 11-02-2021, 08:17 AM

34_40 I agree. Awesome work once... 11-02-2021, 09:23 AM

36 sedan You are the Wizard of METAL! 11-03-2021, 05:28 AM

MP&C My scrap pile would say... 11-03-2021, 08:03 AM

36 sedan I peeked behind the curtain,... 11-03-2021, 07:35 PM

firebird77clone It's beautiful, but clearly... 11-08-2021, 06:47 PM

MP&C Thanks guys! Wagon... 11-21-2021, 07:19 AM

MP&C At this point we need to hem... 11-21-2021, 07:40 AM

MP&C So I've had some questions as... 11-22-2021, 05:13 AM

MP&C Time for some welding.. TIG... 11-23-2021, 09:49 PM

MP&C More work on the Caddy air... 11-26-2021, 09:27 PM

34_40 As always. your (and the... 11-27-2021, 04:33 AM

MP&C When it was made we put some... 11-27-2021, 05:39 AM

rspears I continue to be amazed!... 11-27-2021, 06:24 AM

johnboy I have to reiterate what... 11-27-2021, 07:44 PM

MP&C Thanks fellas.. Keeping... 11-27-2021, 08:33 PM

MP&C Last night we changed out the... 12-01-2021, 06:22 AM

rspears Gotta say I was a bit... 12-01-2021, 07:32 AM

johnboy I'm with you Roger. Some of... 12-01-2021, 06:50 PM

MP&C I did price materials... ... 12-01-2021, 08:50 AM

MP&C Now to fold the outer... 12-08-2021, 05:30 AM

34_40 I know some of the things... 12-08-2021, 06:13 PM

MP&C More travel for the day job,... 12-21-2021, 09:12 AM

stovens You make everything you do... 12-21-2021, 09:41 AM

34_40 I agree.. this build... 12-22-2021, 05:01 AM

johnboy What Steve and Mike said.... 12-22-2021, 07:32 PM

MP&C For your continued... 12-23-2021, 07:49 AM

NTFDAY That should make for an... 12-23-2021, 09:11 AM

Navy7797 your metal work is fabulous... 12-27-2021, 05:48 PM

johnboy What he said. With your... 12-27-2021, 08:02 PM

40FordDeluxe Robert, more outstanding work... 12-29-2021, 04:40 AM

MP&C Thanks for checking out our... 01-12-2022, 05:55 AM

v8nutz I like the dash trim, that... 01-12-2022, 07:22 AM

34_40 Cosmo and I approved the Mice... 01-12-2022, 09:17 AM

stovens Very cool. Like the hammer... 01-12-2022, 09:30 AM

MP&C Thanks guys!! Thought I... 01-13-2022, 05:59 AM

rspears :HMMM: Or perhaps she felt... 01-13-2022, 09:35 AM

wrp Love your build. Have a... 01-29-2022, 02:23 PM

MP&C More blocking, then more... 01-30-2022, 09:48 AM

rspears Both the artwork and shirt... 01-30-2022, 10:39 AM

Bob Parmenter Looks like an old Earl Schieb... 01-31-2022, 04:44 AM

MP&C Thanks for the comments!!! ... 02-06-2022, 10:19 AM

34_40 pretty cool how that works. 02-06-2022, 02:02 PM

stovens very cool. didn't realize the... 02-07-2022, 10:19 AM

MP&C Finally back from the latest... 04-18-2022, 11:45 AM

MP&C So...where we had left off on... 04-18-2022, 11:57 AM

MP&C While we're getting prepared... 04-22-2022, 05:39 AM

MP&C Today we had a back up and... 04-23-2022, 09:23 PM

MP&C We did a test fit of the... 05-16-2022, 12:45 PM

stovens Dash is Stunning, Project so... 05-16-2022, 07:01 PM

34_40 Reality check... is that what... 05-17-2022, 04:25 AM

MP&C OK, long overdue for an... 06-03-2022, 07:22 PM

40FordDeluxe Very nice work! I bet you are... 06-07-2022, 05:44 AM

MP&C Thanks Ryan, yeah, getting... 06-07-2022, 05:59 AM

MP&C Never know what you see in... 06-11-2022, 10:19 AM

34_40 How hard was it to "break... 06-12-2022, 05:34 AM

MP&C I had actually cut a couple... 06-12-2022, 08:20 AM

34_40 I can "see" that. Hence the... 06-12-2022, 01:39 PM

MP&C One expensive lesson we... 06-21-2022, 10:23 AM

34_40 In your "milling machine", is... 06-21-2022, 01:18 PM

MP&C 74515 With some... 06-21-2022, 02:55 PM

40FordDeluxe More absolutely amazing work... 06-22-2022, 03:08 AM

MP&C I've used it almost... 06-22-2022, 04:19 AM

34_40 Of course you do! LOL.. 06-22-2022, 09:08 AM

MP&C Update on the Kent bike seat,... 07-03-2022, 09:11 AM

stovens Very nice, probably better... 07-03-2022, 11:15 AM

MP&C So I've been rather lax on... 07-03-2022, 01:13 PM

34_40 So, with Dale Jr's plate and... 07-04-2022, 04:28 AM

MP&C Police were on scene and left... 07-04-2022, 07:58 AM

34_40 Glad to hear it. Some things... 07-05-2022, 06:11 AM

MP&C With fence repair duties out... 07-14-2022, 05:54 AM

v8nutz That trim looks beautiful.... 07-14-2022, 08:01 AM

stovens Top notch! 07-14-2022, 09:30 AM

Navy7797 You always amaze with... 07-21-2022, 03:13 PM

MP&C Thanks guys! More... 08-10-2022, 05:12 AM

34_40 As always,such nice work.. 08-10-2022, 05:58 AM

johnboy What he said. 08-10-2022, 09:48 PM

MP&C I spent a week in Tennessee... 09-07-2022, 09:12 PM

NTFDAY That was one of the most... 09-07-2022, 09:33 PM

v8nutz Downright scary. 09-08-2022, 08:09 AM

34_40 Is that a red #00 going to a... 09-08-2022, 12:50 PM

MP&C Progress on the 39's wiring,... 09-24-2022, 11:39 PM

34_40 Again, as always, Nice work. ... 09-25-2022, 06:06 AM

MP&C That’s what’s I typically... 09-25-2022, 06:28 AM

MP&C A recent find of some... 10-10-2022, 09:03 PM

34_40 You mean there are still... 10-11-2022, 05:50 AM

MP&C We've all seen the rusted out... 01-16-2023, 05:32 AM

MP&C The hinge covers for the... 01-16-2023, 07:46 AM

MP&C In looking through some... 01-22-2023, 12:36 PM

hammer-time Very nice work... 01-31-2023, 02:00 PM

v8nutz Beautiful work! 01-23-2023, 06:46 AM

34_40 I agree! As always some... 01-23-2023, 09:37 AM

MP&C Thanks guys! We were trying... 01-23-2023, 12:09 PM

rspears Amazing work as usual! ... 01-24-2023, 08:03 AM

MP&C She will be driving it... ... 01-24-2023, 08:16 AM

34_40 Hinge Covers.. it wasn't... 01-24-2023, 09:30 AM

MP&C Day job and the travel... 01-24-2023, 09:49 AM

40FordDeluxe Don't let them drag you down.... 01-25-2023, 07:15 AM

MP&C The hinge covers will be... 01-25-2023, 08:10 AM

34_40 And you still did 20 years... 02-02-2023, 05:18 PM

firebird77clone Wow, 20 years of quality... 02-01-2023, 06:07 PM

34_40 Post 1 dated 01-10-2013...... 02-02-2023, 09:52 AM

rspears Yeah Mike, but Robert's put... 02-02-2023, 02:19 PM

MP&C To break it down, the wagon... 02-02-2023, 11:22 PM

MP&C Tying up some loose ends, We... 02-13-2023, 04:17 AM

MP&C More progress on the dash... 02-25-2023, 07:57 PM

MP&C More shiny stuff... ... 03-01-2023, 11:37 AM

MP&C Before we could install the... 03-18-2023, 11:59 PM

40FordDeluxe Wow, more astounding work by... 03-22-2023, 05:34 AM

rspears Is there a Detroit Autorama... 03-22-2023, 05:51 AM

MP&C The only thing I know of is... 03-22-2023, 09:30 AM

MP&C I've been remiss in posting... 04-20-2023, 06:01 AM

34_40 The solution with those... 04-20-2023, 09:43 AM

40FordDeluxe Very nice work! Your... 04-21-2023, 05:57 AM

rspears LOL I predict fasteners... 04-21-2023, 06:15 AM

MP&C The buffing wheel will take... 04-21-2023, 07:10 AM

MP&C Last bit of progress, we got... 05-04-2023, 10:12 AM

MP&C While assembling the door... 05-19-2023, 05:12 AM

Bob Parmenter Sometimes ya gotta do what ya... 05-20-2023, 04:43 AM

MP&C More progress, we were test... 05-24-2023, 04:25 AM

v8nutz Great attention to the little... 05-24-2023, 08:28 AM

MP&C More progress on the wagon. ... 06-05-2023, 07:36 AM

MP&C Wagon 2.0 progress, I was... 06-05-2023, 07:50 AM

firebird77clone The only thing I haven't seen... 06-05-2023, 01:05 PM

MP&C :LOL: Not used to working... 06-05-2023, 02:43 PM

firebird77clone You're the best. Love your... 06-05-2023, 07:51 PM

MP&C Thanks!!!!!! 06-06-2023, 05:26 AM

v8nutz That's funny, paint the wagon... 06-06-2023, 07:27 AM

MP&C OCD is a powerful drug.. 06-06-2023, 08:04 AM

rspears What are 3 words you never... 06-06-2023, 09:15 AM

MP&C :LOL: ....but I'm trying....... 06-12-2023, 06:32 AM

MP&C Some additional parts for... 06-17-2023, 11:58 PM

53 Chevy5 Your leaving no detail... 06-18-2023, 05:47 AM

MP&C I can see the light, just... 07-07-2023, 04:30 AM

stovens Wow the details just keep on... 07-07-2023, 10:38 AM

MP&C The boss lady had picked up a... 07-14-2023, 04:52 AM

MP&C We picked up the powder... 07-14-2023, 05:21 AM

MP&C Steering column one step... 07-14-2023, 05:27 AM

MP&C More work on the wagons. ... 07-17-2023, 09:48 AM

rspears What a cool idea for the pull... 07-18-2023, 06:57 AM

JOATMON The work displayed in this... 07-18-2023, 12:51 PM

Navy7797 Gorgeous green paint, your... 07-20-2023, 04:15 PM

40FordDeluxe Absolutely amazing work! The... 07-21-2023, 11:03 AM

MP&C Thanks for the comments... 07-22-2023, 09:21 PM

MP&C Some more fabrication work... 07-31-2023, 09:56 AM

Bob Parmenter Fantastic solutions as usual! 08-01-2023, 04:32 AM

40FordDeluxe I never used to start at a... 08-01-2023, 04:52 AM

MP&C Ryan, I can't finish what... 08-07-2023, 12:00 PM

rspears The wagon is GREAT! Looking... 08-07-2023, 04:38 PM

v8nutz Those wheels just don't cut... 08-07-2023, 05:00 PM

40FordDeluxe Everything is looking great!... 08-08-2023, 04:28 AM

MP&C Jesse Harris, a metalshaper... 08-15-2023, 05:34 AM

Navy7797 Thanks for posting that video... 08-15-2023, 12:40 PM

MP&C More installing stainless... 09-10-2023, 10:12 PM

MP&C Picked up the vent window... 09-25-2023, 08:55 PM

MP&C More progress on the wagon,... 10-06-2023, 05:36 AM

stovens I'm going to need to do that... 10-06-2023, 09:44 AM

MP&C Where we start depends on the... 10-06-2023, 02:45 PM

MP&C Well in our typical back up... 10-25-2023, 03:59 AM

v8nutz Incredible detail, very nice. 10-25-2023, 07:47 AM

34_40 I agree! As always the level... 10-25-2023, 09:34 AM

rspears More great attention to... 10-25-2023, 10:38 AM

MP&C Trying to assemble the... 03-25-2024, 05:09 AM

rspears It's a beauty!! 03-25-2024, 05:17 AM

MP&C More console work, time to... 03-30-2024, 08:33 PM

34_40 Amazing! As always. Just... 03-31-2024, 05:09 AM

v8nutz Jeez, that's some delicate... 03-31-2024, 07:09 AM

MP&C Next step for the console, we... 04-13-2024, 11:29 PM

rspears You are a Wizard with the... 04-14-2024, 05:26 AM

MP&C There were a couple of... 04-15-2024, 06:01 AM

hammer-time That's fantastic work...using... 04-17-2024, 01:43 PM

rspears As I've gotten older the... 04-17-2024, 04:03 PM

Navy7797 Beautiful work as always ! 04-14-2024, 06:02 PM

MP&C We had ordered a 4 position... 05-01-2024, 05:08 AM

v8nutz Wow, amazing work! 05-01-2024, 07:50 AM

34_40 I agree. Robert / MP&C , I... 05-01-2024, 10:05 AM

MP&C Thanks guys! Holes... 05-03-2024, 08:25 AM

MP&C We got the other side trim... 05-09-2024, 05:34 AM

Navy7797 Very impressed with the trim... 05-11-2024, 07:00 PM

MP&C Got some pics from JB at the... 05-29-2024, 06:29 AM

34_40 What happens to it now? 05-29-2024, 04:15 PM

MP&C JB actually built it for his... 05-29-2024, 06:18 PM

MP&C The truck was performing... 07-15-2024, 04:42 AM

MP&C Saturday we had about a three... 07-15-2024, 04:44 AM

MP&C A slight detour to pick up a... 07-15-2024, 04:34 AM

Bob Parmenter Looks like a very nice rig. ... 07-15-2024, 04:44 AM

MP&C Bob, it's actually 133xxx. ... 07-15-2024, 04:57 AM

stovens Thanks for sharing, love... 07-15-2024, 08:46 AM

34_40 Great ride Robert, Nice... 07-16-2024, 06:47 PM

rspears What an adventure!! Speedy... 07-16-2024, 07:41 PM

MP&C Been playing catchup for a... 09-30-2024, 09:45 AM

rspears Such great attention to... 09-30-2024, 10:34 AM

MP&C Roger, besides all the... 10-01-2024, 03:55 AM

MP&C Well, it's about high time we... 10-01-2024, 11:19 AM

v8nutz Wow, that is beautiful work! 10-01-2024, 01:32 PM

MP&C Thanks!! I got the 15x8... 10-02-2024, 09:26 PM

34_40 [QUOTE=MP&C;599089]Thanks!! ... 10-13-2024, 07:13 PM

rspears Almost looks like a "Before"... 10-03-2024, 10:06 AM

Navy7797 wow just fantastic... 10-05-2024, 03:39 PM

MP&C More progress on the wagon...... 12-04-2024, 04:36 AM

Bob Parmenter Robert, it goes without... 12-04-2024, 05:13 AM

NTFDAY I have a question, are you... 12-04-2024, 05:43 AM

MP&C Headlight relay location is... 12-04-2024, 08:48 AM

NTFDAY On my 76 Corvette I placed... 12-04-2024, 03:27 PM

v8nutz Beautiful work, that is one... 12-04-2024, 08:55 AM

stovens incredible! 12-04-2024, 10:39 AM

Navy7797 Man that's sweet than CANDY... 12-04-2024, 06:08 PM

MP&C Shop truck update, I had some... 01-13-2025, 05:16 AM

rspears Sweet! Exhaust sounds great,... 01-13-2025, 05:45 AM

34_40 Nice work on the exhaust... 01-13-2025, 12:19 PM

rspears That had me scratching my... 01-13-2025, 12:39 PM

34_40 Yes, it popped into my head... 01-13-2025, 12:49 PM

MP&C Correct, the 410 was a two... 01-13-2025, 01:40 PM

34_40 Weeks, not Years... hahahaha... 01-14-2025, 06:38 AM

MP&C Collecting more parts for the... 03-03-2025, 05:01 AM

rspears Necessity is the mother of... 03-03-2025, 08:10 AM

Mike P I like the idea of the... 03-03-2025, 10:13 AM

MP&C Many of the long tube cast... 03-03-2025, 12:07 PM

glennsexton Very nice! Appreciate the... 03-03-2025, 10:55 PM

10-13-2013 02:44 AM #11

34_40
CHR Member

Join Date

Sep 2007

Location

New Bedford

Car Year, Make, Model: 34 Ford 3W Coupe Replica

Posts

14,754

Ingenious! Amazing! Fascinating! I love reading your posts.. I learn details that I've admittedly, just never thought of before!

So thanks for making the time to share!!

ted dehaan, HWORRELL, rumrumm and 5 others like this.

Reply With Quote

« Previous Thread | Next Thread »

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

New Forum Posts
- And then a newer model....
  
  Montana Mail Runner
  
  Yesterday, 04:37 AM
- Christine asked that I post the link to Mike's Obituary -...
  
  We Lost a Good One
  
  04-09-2025, 01:53 PM
- It's merely the evolution of the conestoga wagon
  
  Montana Mail Runner
  
  04-09-2025, 01:38 PM
- Saw this posted on FB, and thought of posting it on the Joke Page as a Model A Donk, but then thought it's not a joke, it's cool!! -
  
  Montana Mail Runner
  
  04-09-2025, 10:12 AM
- Mike was a great guy with a lot of knowledge and always had good things to say. May he rest in peace. I hope he's up there playing with hot rods now as well.
  
  We Lost a Good One
  
  04-09-2025, 08:56 AM
Everywhere sidebar 1.4.1

Powered by vBulletin™ Version 4.1.3
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
Tabs System by vbSoporte - vBulletin en Español
vBulletin Styles developed by vBStyles.com

All material found at Club Hot Rod are copyright protected

Links monetized by VigLink