Yeah, but that attention to detail is also why we're not done yet



Today the baffle got welded into the core support, here with the plug weld holes drilled.





The modified relief we fabricated shows to be about as low as we could have made it..











Then attention was turned to the rear quarter on the passenger side where we had shaved the lead seam..








We had held off on the tail light opening as we wanted to fit the opening to the light bezels. We had received the reproduction chrome light bezels a couple weeks ago, and gave them a protective layer to keep the chrome nice and shiny..





The light opening seemed all out of sorts, with a bulge protruding out past the corner of the bezel here....





Let the modifications begin!

















And we had the opposite problem on the inner side...





The vise grip dent puller and the special hook was used to spread the opening...





A bit better.....





...and the tail light bracket is welded back together.. This mod seemed to make the attaching holes align better as well..





And Kyle continues to finish up the seam and we'll fine tune the opening once more when the welding and planishing is complete.