Thanks Rich!


Kyle got some more welding done and we noticed the patch he made didn't quite have the same crown as the dash next to it. He had left the patch flat, so the difference was becoming more noticeable the more it was welded.





So the Watervliet planishing hammer was used to add some crown to the panel, and also to planish some of the weld while we were at it..


An 8" radius lower die worked nicely to duplicate the crown:





Planishing welds...


https://youtu.be/fAnfqtw-C6I


Two holes to go..





rear view... both sides still need sanding with the roloc, we'll get that once the radio knob holes are done and ready for sanding as well.





Tailgate is blocking out pretty nice, did have a few low spots to address that still need feathering out....