I have a couple radius bends to do on the AC condenser bracket, so a piece of 1/2" 4130 was added to the Magnetic Brake die.. This will help keep things from moving, and it is welded on what is usually the back side, so no interference otherwise...










This will be the mounting flange to the radiator..











1" rod is used to form the radius on the side "covers"







A test fit before we cut out the gaping hole for air flow....



https://www.youtube.com/watch?v=YbIW...ature=youtu.be



The center hole is cut out and a flange tipped for wrapping a 3/16" rod for wire edge. This should add plenty of strength, if the 16 GA wasn't enough..







Our anvil we made up for stretching the metal in the corners for tipping..











Where we left off....to be continued..