Thanks for the comments guys! Always fun to take a day for louvers!


Time to play catch up here..


Vince got two of the milk cans media blasted and worked on the third while I sprayed some SPI epoxy primer on the first two.








Also got some epoxy on the hood brace...





Ends are quite a bit better than before..








I received a state of the art drawing the other day, and was asked if we could duplicate the 1/16 offset shown...





Of course this meant we needed some new tooling..











Our first sample, with the proper 3/4 flange...











We had another panel that would require the offset on two adjacent edges, so one more sample...











video action:


https://www.youtube.com/watch?v=oxhk_O1FJTM


That'll do pig, that'll do.


Some of the upholstery parts have been trickling in... so let's add some bling factor....




















….and we made a hand punch for setting the trim tag rivets on the cowl...








video version:


https://www.youtube.com/watch?v=gUl3K5uN5h0


And finally, we also had some 3/8 stainless fuel line to straighten out of it's coil for a big block mopar… Video parts 1, 2, and 3:


https://www.youtube.com/watch?v=H7eDRdQ-hco


https://www.youtube.com/watch?v=np4Lae3FTC8


https://www.youtube.com/watch?v=8NsOkSsVxZ8



.