Thanks Bob!


Well today was slated as lift-off day. So we got our lifting eyes installed on the body this morning and set up the lifting devices.



We loaded the frame onto the trailer, figured a winch would be easier than pushing..



Getting the body ready to separate from the rotisserie...















With the body bolted down, we moved it outside to take some pictures..





Here is the room we have behind the engine for access to the O2 sensor connector...





Our attempt to install the rear bumper so we could look at it with some chrome on the rear end did not fare well. The bumper brackets did not line up correctly, just my luck, so we added length and welded the original holes closed so they can be moved to the correct location...