Thread: '67 Mustang Convertable build

Tweet

No, not original color - some sort of blue i expect, stock otherwise.
Here is todays work, the pics don't come out in the right order. i am ready to clean the torque box for repair - i have to start here because of how the sheetmetal lies. I'll have to repair the torque box, then replace the toeboard befor the floor pan.
The torque box has an odd shape and just tyes stuff together and makes little sense looking in from this angle. I fitted a piece of 16gage and cleco'd it for test fit - the hole for the frame is in it.
i then tacked welded it and slid the frame (inner rocker box) in place for test fit to see if any nasty gaps and get measurements for the toe board.
I then trial fit the toeboard. lots of trimming to get done at this point, i was concerned with the fit around the frame rail.