815LikesThread: 1940 Ford Pickup
Results 1 to 15 of 1085
LinkBack URL
About LinkBacksHybrid View
-
08-12-2013 06:12 AM #1
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,891
Make sure you get the upper grille support piece compatible with the hood latch. 40 and 41 are different (with the exception of some early 41s using carryover parts).
Also check around the back edge of the hood around where the hinge brackets are, there's usually a number of small stress cracks that need to be repaired.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
09-01-2013 03:56 PM #2
CHR Member
- Join Date
- Mar 2013
- Location
- Seguin
- Car Year, Make, Model: 1940 Ford p/u 1937 Caddy Coupe
- Posts
- 780
Update: Got around to starting the floor and front and rear cab corner repair. As I took it apart and did a little sand blasting I discovered that new parts were in order. Replacing the pass side rear cab corner and all of the front pass lower door post area.
Last edited by Navy7797; 09-01-2013 at 04:02 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Looks Factory!!
1968 Plymouth Valiant 1st Gen HEMI