Quote Originally Posted by daveS53 View Post
What's the angle on that middle u-joint? The picture may look deceiving, but it looks like more than 35 degrees from a straight line and that's usually the maximum recommended.

I had to use a double u-joint on my car, because the angle was going to be about 45 degrees. A double joint will do 70, but it also requires a support on both sides. Someone building the same car as mine, posted this picture of his steering shaft. There's a problem there.
As I said in the post above,
Quote Originally Posted by rspears
The middle joint is running right at the limit for angle, but it's smooth, no bind so it's good to go.
but thanks for your concern.