Thread: Stude M5 build

Tweet

I was totally lucky on the trans mount, the chevy rubber mount lined right up with the ford cross member, all I had to do was put a bolt in it!
I got a 96 caddy steering column at pick n pull and was able to use a combo of the caddy and the explorer steering joints with only minor mods I had the steering hooked up. I had to cut off the caddy column mount and make my own. I cut a notch in the dash and reinforced it to mount the column to.
I found that my feet were really cramped in the little cab making it difficult to operate the pedals, so I made an extended foot well area, it actually made a lot of difference.