Thread: Stude M5 build

Tweet

Finally tracked down my AC leaks, had to buy a sniffer tool to do it. It was one hose fitting that attached to the condenser and one quick connect fitting on my AC manifold hose. The thrill of victory turned to the agony of defeat on the test drive when my water pump sprung a leak. The replacement appeared to leak too (made in USA Melling) so I have another on order.
While it's down I decided to cut down the rear lowering blocks to raise the rear about 3/8" since it had dropped with the hydro shocks. Used the table saw with a guide and multiple thin passes, turned out nice. I have a 1/4 inch lowering block leftover if anyone need one LOL.