563LikesThread: Stude M5 build
Results 1 to 15 of 436
LinkBack URL
About LinkBacksThreaded View
-
08-06-2024 06:46 PM #17
CHR Member
- Join Date
- Nov 2016
- Location
- rocklin
- Posts
- 644
Not real exciting stuff but I have been tinkering on it. I used some Casweld PM to solder a crack in my pot metal hood ornament, it worked OK for that. I tried to fill all the pock holes that are everywhere but I just couldn't get it to work so gave up on that. I repaired the hood trim strip, it had an ugly hole it, it was longer than I needed with the ornament so I cut off a good section and welded it where the hole used to be. It turned out all right, you would have to be looking for the weld joint to find it.
My hood rod mount was long gone so I made a stainless mount for that, so I don't have to use my piece of wood to hold the hood up anymore LOL.Last edited by v8nutz; 08-06-2024 at 06:53 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I did not know Mike very well, we exchanged some messages from time to time but from what I understand he was a very good man. I was sad to learn about this
We Lost a Good One